Share Email Print
cover

Proceedings Paper

Material characterization for morphing purposes in order to match flight requirements
Author(s): Sebastian Geier; Markus Kintscher; Olaf Heintze; Peter Wierach; Hans-Peter Monner; Martin Wiedemann
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Natural laminar flow is one of the challenging aims of the current aerospace research. Main reasons for the aerodynamic transition from laminar into turbulent flow focusing on the airfoil-structure is the aerodynamic shape and the surface roughness. The Institute of Composite Structures and Adaptive Systems at the German Aerospace Center in Braunschweig works on the optimization of the aerodynamic-loaded structure of future aircrafts in order to increase their efficiency. Providing wing structures suited for natural laminar flow is a step towards this goal. Regarding natural laminar flow, the structural design of the leading edge of a wing is of special interest. An approach for a gap-less leading edge was developed to provide a gap- and step-less high quality surface suited for natural laminar flow and to reduce slat noise. In a national project the first generation of the 3D full scale demonstrator was successfully tested in 2010. The prototype consists of several new technologies, opening up the issue of matching the long and challenging list of airworthiness requirements simultaneously. Therefore the developed composite structure was intensively tested for further modifications according to meet requirements for abrasion, impact and deicing basically. The former presented structure consists completely of glass-fiber-prepreg (GFRP-prepreg). New functions required the addition of a new material-mix, which has to fit into the manufacturing-chain of the composite structure. In addition the hybrid composites have to withstand high loadings, high bending-induced strains (1%) and environmentally influenced aging. Moreover hot-wet cycling tests are carried out for the basic GFRP-structure in order to simulate the long term behavior of the material under extrem conditions. The presented paper shows results of four-points-bending-tests of the most critical section of the morphing leading edge device. Different composite-hybrids are built up and processed. An experimental based trend towards an optimized material design will be shown.

Paper Details

Date Published: 27 March 2012
PDF: 12 pages
Proc. SPIE 8341, Active and Passive Smart Structures and Integrated Systems 2012, 834113 (27 March 2012); doi: 10.1117/12.915240
Show Author Affiliations
Sebastian Geier, Deutsches Zentrum für Luft- und Raumfahrt e.V. (Germany)
Markus Kintscher, Deutsches Zentrum für Luft- und Raumfahrt e.V. (Germany)
Olaf Heintze, Invent GmbH (Germany)
Peter Wierach, Deutsches Zentrum für Luft- und Raumfahrt e.V. (Germany)
Hans-Peter Monner, Deutsches Zentrum für Luft- und Raumfahrt e.V. (Germany)
Martin Wiedemann, Deutsches Zentrum für Luft- und Raumfahrt e.V. (Germany)


Published in SPIE Proceedings Vol. 8341:
Active and Passive Smart Structures and Integrated Systems 2012
Henry A. Sodano, Editor(s)

© SPIE. Terms of Use
Back to Top