Share Email Print
cover

Proceedings Paper

High aspect ratio microfeatures with laser texturing in mixed ablative-melting regime
Author(s): Pablo M. Romero; Nerea Otero; Alejandro González; Patricia Vázquez
Format Member Price Non-Member Price
PDF $17.00 $21.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Surface texturing of metallic surfaces is studied in mixed regimes of ablation and melting, by adjusting time and energy distribution of infrared lasers, for textures combining ablated and elevated topography in relation to the original surface. This can allow for higher productivities and a wider range of geometries than purely ablative micromachining LST. A methodology is presented for producing regular patterns of micron sized features on metals. By adjusting scanning patterns, features well under the beam size can be obtained, resulting from the displacement of the molten bath by the intense recoil pressure generated by the ablated metal. By engineering the flow of the bath and the position of the recast material, very high aspect ratio structures can be obtained, with limits very dependent on the characteristics (viscosity, temperature, ...) of the molten bath. 2-5 microns sized walls, 40 microns high, were obtained with nanosecond laser of 50 microns beam diameter on titanium. Sub-nanosecond laser pulses were also studied: passively q-switched lasers with 400-500 ps pulse length provide very precise control of molten pool displacement and fine feature generation. Ni-Cr and Ni-Cu coated steel was textured in the form of two dimensional square textures and ribletted surfaces, in order to evaluate the molten metal flow, the progressive shaping of the textures and the redistribution of the layer components during the process.

Paper Details

Date Published: 7 February 2012
PDF: 18 pages
Proc. SPIE 8248, Micromachining and Microfabrication Process Technology XVII, 82480C (7 February 2012); doi: 10.1117/12.907797
Show Author Affiliations
Pablo M. Romero, Asociación de Investigación Metalúrgica del Noroeste (Spain)
Nerea Otero, Asociación de Investigación Metalúrgica del Noroeste (Spain)
Alejandro González, Asociación de Investigación Metalúrgica del Noroeste (Spain)
Patricia Vázquez, Asociación de Investigación Metalúrgica del Noroeste (Spain)


Published in SPIE Proceedings Vol. 8248:
Micromachining and Microfabrication Process Technology XVII
Mary Ann Maher; Paul J. Resnick, Editor(s)

© SPIE. Terms of Use
Back to Top