Share Email Print
cover

Proceedings Paper

Fabrication of fiber-optic EFPI with double-layer SU-8 diaphragm
Author(s): Ding Ding; Na Chen; Qiang Guo; Zhenyi Chen; Shupeng Liu; Fufei Pang; Tingyun Wang
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

In this paper, we fabricated fiber-optic extrinsic Fabry-Perot interferometric (EFPI) sensors with photolithography . The sensor has double-layer SU-8 diaphragm: one is the pressure transduction layer; the other is cavity control layer. Since SU-8 material has a low Young's modulus, high pressure sensitivity can be achieved with SU-8 diaphragm. The EFPI were formed by a single mode fiber and a double-layer SU-8 diaphragm. To improve the fringe contrast, gold mirrors with a reflectivity of 50% were evaporated onto the end face of the single mode fiber and the inner face of the SU-8 diaphragm respectively. Experiments were done to estimate the performance of the sensor for static pressure measurement. The results show that an expected cavity length of the sensor was obtained and the EFPI sensor has a good linearity from 100 to 2500 Pa with 100 Pa resolution and a sensitivity of 154.8 nm/kPa.

Paper Details

Date Published: 29 November 2011
PDF: 6 pages
Proc. SPIE 8311, Optical Sensors and Biophotonics III, 83112I (29 November 2011); doi: 10.1117/12.905510
Show Author Affiliations
Ding Ding, Shanghai Univ. (China)
Na Chen, Shanghai Univ. (China)
Qiang Guo, Shanghai Univ. (China)
Zhenyi Chen, Shanghai Univ. (China)
Shupeng Liu, Shanghai Univ. (China)
Fufei Pang, Shanghai Univ. (China)
Tingyun Wang, Shanghai Univ. (China)


Published in SPIE Proceedings Vol. 8311:
Optical Sensors and Biophotonics III
Jürgen Popp, Editor(s)

© SPIE. Terms of Use
Back to Top