Share Email Print
cover

Proceedings Paper

Capillary flow in microfluidic Hele-Shaw cells
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Capillary flow in microchannels has received substantial attention of investigation recently due to its potential applications in microfluidics. This paper will report the new findings of capillary flow behavior in microfluidic Hele- Shaw flow cells. Flow cells with a rectangular cross section of 50×50, 50×500, 20×200, and 50×1000μm were used. It was observed that the shape of the meniscus varied with cell size and aspect ratio. The shape was also strongly affected by the contact lines on both sidewalls and the gas phase flow in front of the meniscus. For cells with same height, the meniscus was stretched more in the flow direction for wider cells. The measured averaged speed of the interface was 5.7, 8.3, 8.3 and ~8 mm/s for the flow cells with a cross section of 50×50, 50×500 and 50×1000μm, respectively. The speed of interface movement was not affected significantly by the aspect ratio for the values used in the current study. The average speed for the flow cells agree reasonably well with the value from the theoretical analysis.

Paper Details

Date Published: 23 December 2011
PDF: 6 pages
Proc. SPIE 8204, Smart Nano-Micro Materials and Devices, 82040M (23 December 2011); doi: 10.1117/12.903213
Show Author Affiliations
K. Petkovic-Duran, Commonwealth Scientific and Industrial Research Organisation (Australia)
Y. Zhu, Commonwealth Scientific and Industrial Research Organisation (Australia)


Published in SPIE Proceedings Vol. 8204:
Smart Nano-Micro Materials and Devices
Saulius Juodkazis; Min Gu, Editor(s)

© SPIE. Terms of Use
Back to Top