Share Email Print
cover

Proceedings Paper

OPC modeling and correction solutions for EUV lithography
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

The introduction of EUV lithography into the semiconductor fabrication process will enable a continuation of Moore's law below the 22nm technology node. EUV lithography will, however, introduce new sources of patterning distortions which must be accurately modeled and corrected with software. Flare caused by scattered light in the projection optics result in pattern density-dependent imaging errors. The combination of non-telecentric reflective optics with reflective reticles results in mask shadowing effects. Reticle absorber materials are likely to have non-zero reflectivity due to a need to balance absorber stack height with minimization of mask shadowing effects. Depending upon placement of adjacent fields on the wafer, reflectivity along their border can result in inter-field imaging effects near the edge of neighboring exposure fields. Finally, there exists the ever-present optical proximity effects caused by diffractionlimited imaging and resist and etch process effects. To enable EUV lithography in production, it is expected that OPC will be called-upon to compensate for most of these effects. With the anticipated small imaging error budgets at sub-22nm nodes it is highly likely that only full model-based OPC solutions will have the required accuracy. The authors will explore the current capabilities of model-based OPC software to model and correct for each of the EUV imaging effects. Modeling, simulation, and correction methodologies will be defined, and experimental results of a full model-based OPC flow for EUV lithography will be presented.

Paper Details

Date Published: 13 October 2011
PDF: 11 pages
Proc. SPIE 8166, Photomask Technology 2011, 81660Q (13 October 2011); doi: 10.1117/12.899591
Show Author Affiliations
James Word, Mentor Graphics Corp. (United States)
Christian Zuniga, Mentor Graphics Corp. (United States)
Michael Lam, Mentor Graphics Corp. (United States)
Mohamed Habib, Mentor Graphics Corp. (Egypt)
Kostas Adam, Mentor Graphics Corp. (United States)
Michael Oliver, Mentor Graphics Corp. (United States)


Published in SPIE Proceedings Vol. 8166:
Photomask Technology 2011
Wilhelm Maurer; Frank E. Abboud, Editor(s)

© SPIE. Terms of Use
Back to Top