Share Email Print
cover

Proceedings Paper

Topographic correction realization based on the CBERS-02B image
Author(s): Hui-ping Qin; Wei-ning Yi
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

The special topography of mountain terrain will induce the retrieval distortion in same species and surface spectral lines. In order to improve the research accuracy of topographic surface characteristic, many researchers have focused on topographic correction. Topographic correction methods can be statistical-empirical model or physical model, in which the methods based on the digital elevation model data are most popular. Restricted by spatial resolution, previous model mostly corrected topographic effect based on Landsat TM image, whose spatial resolution is 30 meter that can be easily achieved from internet or calculated from digital map. Some researchers have also done topographic correction based on high spatial resolution images, such as Quickbird and Ikonos, but there is little correlative research on the topographic correction of CBERS-02B image. In this study, liao-ning mountain terrain was taken as the objective. The digital elevation model data was interpolated to 2.36 meter by 15 meter original digital elevation model one meter by one meter. The C correction, SCS+C correction, Minnaert correction and Ekstrand-r were executed to correct the topographic effect. Then the corrected results were achieved and compared. The images corrected with C correction, SCS+C correction, Minnaert correction and Ekstrand-r were compared, and the scatter diagrams between image digital number and cosine of solar incidence angel with respect to surface normal were shown. The mean value, standard variance, slope of scatter diagram, and separation factor were statistically calculated. The analysed result shows that the shadow is weakened in corrected images than the original images, and the three-dimensional affect is removed. The absolute slope of fitting lines in scatter diagram is minished. Minnaert correction method has the most effective result. These demonstrate that the former correction methods can be successfully adapted to CBERS-02B images. The DEM data can be interpolated step by step to get the corresponding spatial resolution approximately for the condition that high spatial resolution elevation data is hard to get.

Paper Details

Date Published: 15 August 2011
PDF: 8 pages
Proc. SPIE 8196, International Symposium on Photoelectronic Detection and Imaging 2011: Space Exploration Technologies and Applications, 819609 (15 August 2011); doi: 10.1117/12.899030
Show Author Affiliations
Hui-ping Qin, Anhui Institute of Optics and Fine Mechanics (China)
Anhui Normal Univ. (China)
Wei-ning Yi, Anhui Institute of Optics and Fine Mechanics (China)


Published in SPIE Proceedings Vol. 8196:
International Symposium on Photoelectronic Detection and Imaging 2011: Space Exploration Technologies and Applications
John C. Zarnecki; Carl A. Nardell; Rong Shu; Jianfeng Yang; Yunhua Zhang, Editor(s)

© SPIE. Terms of Use
Back to Top