Share Email Print
cover

Proceedings Paper

Dynamic concentricity measurement of large interval-diameter ratio holes with virtual annular quadrant method
Author(s): Qian Liu; Weichuan Yang; Bing Yao; Jiadong Jang; Jun Hu
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Dynamic concentricity measurement of small holes distributed in large room is valuable in assembling some big and complex optical facility. It's not feasible for the conventional measurement with portable CMM or laser tracker. A solution of dynamic concentricity measurement is put forward in this article, in which low power laser was selected as reference and camera &lens were used to acquire images of holes and laser spots. The relative orientation of hole and spot could be detected after image processing. To overcome the shortcoming that the edge of laser spot could not be detected for laser's Gaussian character with traditional method, a virtual annular quadrant (VAQ) method was proposed to determine the relative orientation between small holes and laser spot. With the simulation of VAQ method, the property was analyzed and the parameters of VAQ were optimized with the simulation results. Experiments were carried out to test VAQ method, and comparison of simulated and experimental results has confirmed the accuracy of VAQ method. A dynamical concentricity measuring system based on VAQ method is developed, which can perform one measurement in 5 seconds and has accuracy of about 0.015mm.

Paper Details

Date Published: 27 May 2011
PDF: 7 pages
Proc. SPIE 8082, Optical Measurement Systems for Industrial Inspection VII, 80823B (27 May 2011); doi: 10.1117/12.888989
Show Author Affiliations
Qian Liu, Chinese Academy of Engineering Physics (China)
Weichuan Yang, Chinese Academy of Engineering Physics (China)
Bing Yao, Chinese Academy of Engineering Physics (China)
Jiadong Jang, Chinese Academy of Engineering Physics (China)
Jun Hu, Chinese Academy of Engineering Physics (China)


Published in SPIE Proceedings Vol. 8082:
Optical Measurement Systems for Industrial Inspection VII
Peter H. Lehmann; Wolfgang Osten; Kay Gastinger, Editor(s)

© SPIE. Terms of Use
Back to Top