Share Email Print
cover

Proceedings Paper

Straightness inspecting system for long shaft based on cross laser
Author(s): Zhixue Chang; Lingbin Pang; Yaning Yang
Format Member Price Non-Member Price
PDF $17.00 $21.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Based on the principle that the distance from the axle of an inspected long shaft to the two laser planes is unique, the method used image processing to get the coordinate of the cross point and the angle of the horizontal line of the laser image, and calculated the straightness parameters with distance position information along the long shaft. The image processing of the cross laser was carried out by a local maximum intensity. With a camera (640x480 pixels and 0.0973mm/pixel as resolution of target), 50 samples were taken at each distance of 1m, 9m and 18m. The standard deviation was 0.00937mm, 0.0342mm and 0.0860mm for polar radius, 0.843', 1.26' and 1.57' for angle, respectively. Experimental results indicate that the straightness inspection system for long shaft is simple in structure, easy to operate and precise in inspection results.

Paper Details

Date Published: 31 December 2010
PDF: 6 pages
Proc. SPIE 7544, Sixth International Symposium on Precision Engineering Measurements and Instrumentation, 75444G (31 December 2010); doi: 10.1117/12.885807
Show Author Affiliations
Zhixue Chang, Dalian Nationalities Univ. (China)
Lingbin Pang, Dalian Nationalities Univ. (China)
Yaning Yang, Dalian Nationalities Univ. (China)


Published in SPIE Proceedings Vol. 7544:
Sixth International Symposium on Precision Engineering Measurements and Instrumentation
Jiubin Tan; Xianfang Wen, Editor(s)

© SPIE. Terms of Use
Back to Top