Share Email Print
cover

Proceedings Paper

Material micromachining using bursts of high repetition rate picosecond pulses from a fiber laser source
Author(s): Pascal Deladurantaye; Alain Cournoyer; Mathieu Drolet; Louis Desbiens; Dany Lemieux; Martin Briand; Yves Taillon
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

In this paper, we demonstrate the benefits of using bursts of picosecond pulses for material micromachining and compare the results with those obtained when using a nanosecond source with similar pulse energy, pulse width and pulse shape. The picosecond laser source used for the experiments was delivering 60-ps pulses at a repetition rate of 1.8 GHz, grouped within arbitrarily-shaped bursts having a width that could be varied from 2.5 to 40 ns. The laser output central wavelength was at 1064 nm and the output beam M2 value was below 1.15. Micro-milling experiments were performed on silicon for two levels of energy per burst and with different burst amplitude profiles. We show that the maximum material removal efficiency and the surface quality can be increased by more than 25% when using bursts of picosecond pulses with respect to nanosecond pulses with similar energy per pulse. Effect of shaping the burst envelope of the picosecond laser on the maximum material removal efficiency is also presented.

Paper Details

Date Published: 10 February 2011
PDF: 10 pages
Proc. SPIE 7914, Fiber Lasers VIII: Technology, Systems, and Applications, 791404 (10 February 2011); doi: 10.1117/12.875265
Show Author Affiliations
Pascal Deladurantaye, INO (Canada)
Alain Cournoyer, INO (Canada)
Mathieu Drolet, INO (Canada)
Louis Desbiens, INO (Canada)
Dany Lemieux, INO (Canada)
Martin Briand, INO (Canada)
Yves Taillon, INO (Canada)


Published in SPIE Proceedings Vol. 7914:
Fiber Lasers VIII: Technology, Systems, and Applications
Jay W. Dawson, Editor(s)

© SPIE. Terms of Use
Back to Top