Share Email Print
cover

Proceedings Paper

Novel 1.2kW UV laser system for micro fabrication and annealing
Author(s): Ludolf Herbst; Rainer Paetzel; Kai Schmidt
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

The growing demand for laser micro fabrication drives further requirements on higher production speed per part and lower manufacturing costs. A newly developed 1.2 kW 308 nm excimer laser addresses both micro-manufacturing and high production throughput. Solid state UV laser sources usually cannot emit UV laser radiation directly. The inherently required frequency conversion limits the total output power to several 10 Watts below 350 nm. Furthermore these UV-conversion- modules limit the long term reliability of high power UV solid state lasers significantly because of the wear of the conversion crystals. Excimer lasers, however, overcome these issues by direct emission at 308, 248, or 193 nm. By now up to 540 Watts at 308 nm are established in production. With the new laser we have more than doubled the available output power to 1.2 kW. The combination of short wavelength and highest available UV laser power makes it ideal for processing of small features or to modify thin surfaces. Furthermore, pulsed UV laser radiation is very suitable for removing delicate electronic devices from manufacturing substrates. High-power UV laser systems are capable of processing large areas with resolution down to several microns in one single laser ablation step without using multiple lithography and wet chemical processes. For instance, laser Lift-Off and large area annealing have proven to be very efficient manufacturing techniques for volume production. In this paper, a novel 1.2 kW excimer laser will be presented and discussed.

Paper Details

Date Published: 22 February 2011
PDF: 6 pages
Proc. SPIE 7920, Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XVI, 79200Z (22 February 2011); doi: 10.1117/12.874977
Show Author Affiliations
Ludolf Herbst, Coherent GmbH (Germany)
Rainer Paetzel, Coherent GmbH (Germany)
Kai Schmidt, Coherent GmbH (Germany)


Published in SPIE Proceedings Vol. 7920:
Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XVI
Bo Gu; Guido Hennig; Xianfan Xu; Hiroyuki Niino, Editor(s)

© SPIE. Terms of Use
Back to Top