Share Email Print
cover

Proceedings Paper

Ion beam figuring of silicon aspheres
Author(s): Marcel Demmler; Michael Zeuner; Alfonz Luca; Thoralf Dunger; Dirk Rost; Sven Kiontke; Marcus Krüger
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Silicon lenses are widely used for infrared applications. Especially for portable devices the size and weight of the optical system are very important factors. The use of aspherical silicon lenses instead of spherical silicon lenses results in a significant reduction of weight and size. The manufacture of silicon lenses is more challenging than the manufacture of standard glass lenses. Typically conventional methods like diamond turning, grinding and polishing are used. However, due to the high hardness of silicon, diamond turning is very difficult and requires a lot of experience. To achieve surfaces of a high quality a polishing step is mandatory within the manufacturing process. Nevertheless, the required surface form accuracy cannot be achieved through the use of conventional polishing methods because of the unpredictable behavior of the polishing tools, which leads to an unstable removal rate. To overcome these disadvantages a method called Ion Beam Figuring can be used to manufacture silicon lenses with high surface form accuracies. The general advantage of the Ion Beam Figuring technology is a contactless polishing process without any aging effects of the tool. Due to this an excellent stability of the removal rate without any mechanical surface damage is achieved. The related physical process - called sputtering - can be applied to any material and is therefore also applicable to materials of high hardness like Silicon (SiC, WC). The process is realized through the commercially available ion beam figuring system IonScan 3D. During the process, the substrate is moved in front of a focused broad ion beam. The local milling rate is controlled via a modulated velocity profile, which is calculated specifically for each surface topology in order to mill the material at the associated positions to the target geometry. The authors will present aspherical silicon lenses with very high surface form accuracies compared to conventionally manufactured lenses.

Paper Details

Date Published: 23 February 2011
PDF: 6 pages
Proc. SPIE 7934, Optical Components and Materials VIII, 793416 (23 February 2011); doi: 10.1117/12.873787
Show Author Affiliations
Marcel Demmler, Roth & Rau MicroSystems GmbH (Germany)
Michael Zeuner, Roth & Rau MicroSystems GmbH (Germany)
Alfonz Luca, Roth & Rau MicroSystems GmbH (Germany)
Thoralf Dunger, Roth & Rau MicroSystems GmbH (Germany)
Dirk Rost, Roth & Rau MicroSystems GmbH (Germany)
Sven Kiontke, asphericon GmbH (Germany)
Marcus Krüger, asphericon GmbH (Germany)


Published in SPIE Proceedings Vol. 7934:
Optical Components and Materials VIII
Michel J. F. Digonnet; Shibin Jiang; John W. Glesener; J. Christopher Dries, Editor(s)

© SPIE. Terms of Use
Back to Top