Share Email Print

Proceedings Paper

Development of an inner profile measurement instrument using a ring beam device
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Inner profile measurement is an important matter in such fields as medicine, dentistry and anthropology as well as mechanical engineering and other industrial applications. Here we describe recent development of our measurement principle for inner diameter of pipes and/or holes. The key device in this technique is a ring beam device which consists of a conical mirror and a laser diode. And the fundamental principle is based on optical sectioning without using any contact type stylus. The optically sectioned profile of an inner wall of a pipe-like object is analyzed to give the inner profile in addition to the inner diameter. This optical instrument with a simple and small configuration is now under development for practical uses. In our hitherto trial experimental works, the availability of this instrument has been evaluated in many cases and availability for practical applications is expected, especially, for measurement and inspection of mechanical components and elements besides pipes. This ring beam device consisting of a conical mirror and a LD is assembled to form a disk-like light sheet. We show measurement result of pipes and holes, and, at the same time, report a compact inner profile measuring instrument at this point. Both the ring beam device and a miniaturized CCD camera are fabricated into a glass tube. Availability of this instrument is shown by measuring the inner profiles of various pipes. In response to this trial, there appeared a strong request that not only the internal but external profiles should be measured simultaneously. Therefore we propose potentially possible method for measurement of external profile at the same time with internal profile. If one pair of concave mirrors are used in our arrangement, external profile is captured. In combination with inner profile measurement technique, simultaneous measurement of inner and outer profiles becomes attainable. A measurement result on a bevel gear shows availability of here proposed principle. In addition, we are trying to extend our technique to check defects and/or flaws on the inner wall of pipe-like objects.

Paper Details

Date Published: 11 November 2010
PDF: 8 pages
Proc. SPIE 7855, Optical Metrology and Inspection for Industrial Applications, 78550B (11 November 2010); doi: 10.1117/12.870825
Show Author Affiliations
T. Yoshizawa, Saitama Medical Univ. (Japan)
3D Associates (Japan)
T. Wakayama, Saitama Medical Univ. (Japan)

Published in SPIE Proceedings Vol. 7855:
Optical Metrology and Inspection for Industrial Applications
Kevin Harding; Peisen S. Huang; Toru Yoshizawa, Editor(s)

© SPIE. Terms of Use
Back to Top