Share Email Print
cover

Proceedings Paper

Phase errors in speckle reduced laser fringe projection
Author(s): S, Rosendahl; E. Hällstig; P. Gren; M. Sjödahl
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

When measuring 3D-shape with triangulation and projected interference fringes it is of interest to reduce the phase error in the fringe pattern. A study has been carried out concerning parameters that will affect the phase error and an analytical expression has been derived. It is concluded that the phase error depends on the speckle contrast, C, and the modulation, M, of the fringes and since the phase in this investigation is determined using the spatial carrier method the phase error also depends on the filtering of the Fourier spectrum. To reduce the phase error this work has been focusing on suppressing the speckle contrast. For this the method with a moving aperture is used; a disk with several apertures is rotated in the aperture plane of the camera lens. To verify the derived expression for the phase error and the method to suppress speckles both numerical simulations and experiments have been performed. In the measurements made it was concluded that after an aperture movement of three aperture diameters the speckle contrast and hence the phase error was reduced by 60 %. A phase error of 0.15 radians was obtained in the experiments, thus approximately 1/40 of a fringe period.

Paper Details

Date Published: 14 September 2010
PDF: 8 pages
Proc. SPIE 7387, Speckle 2010: Optical Metrology, 73871E (14 September 2010); doi: 10.1117/12.869659
Show Author Affiliations
S, Rosendahl, Luleå Univ. of Technology (Sweden)
E. Hällstig, Optronic (Sweden)
P. Gren, Luleå Univ. of Technology (Sweden)
M. Sjödahl, Luleå Univ. of Technology (Sweden)


Published in SPIE Proceedings Vol. 7387:
Speckle 2010: Optical Metrology
Armando Albertazzi Goncalves; Guillermo H. Kaufmann, Editor(s)

© SPIE. Terms of Use
Back to Top