Share Email Print
cover

Proceedings Paper

Morphological, electrical and optical properties of zinc oxide films grown on different substrates by spray pyrolysis technique
Author(s): Sonik Bhatia; R. K. Bedi
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Zinc Oxide thin films of thickness 0.7μm has been prepared by spray pyrolysis technique on to the sapphire and glass substrates kept at 500°C. The films were formed using two different molar concentration ie 0.15 and 0.2M. These films were characterized for SEM and XRD analysis and it was observed that the average size of the crystallites were of order of 400nm and 325nm for sapphire and glass respectively. XRD analysis revealed that the intensity of peaks were more pronounced in sapphire as compared to glass. Moreover the intensity of (002) plane were increased in both the samples ( films on sapphire and glass) as the concentration of spray solution was increased. V-I characteristics were analyzed for both the samples (using two probe method) and was observed that resistivity for glass and sapphire were of order of 140ohm-cm and 110ohm -cm respectively. Moreover the films were annealed at temperature 350°C for 2hours in vacuum ( 10-5 torr) and was found that resistivity for films on sapphire were decreased by 101. Optical properties for both the samples were studied and was found that band gap for films grown on sapphire was more by 0.02eV as compared to the films on glass.

Paper Details

Date Published: 1 September 2010
PDF: 10 pages
Proc. SPIE 7766, Nanostructured Thin Films III, 776610 (1 September 2010); doi: 10.1117/12.863878
Show Author Affiliations
Sonik Bhatia, Kanya Maha Vidyalaya (India)
R. K. Bedi, Guru Nanak Dev Univ. (India)


Published in SPIE Proceedings Vol. 7766:
Nanostructured Thin Films III
Raúl J. Martin-Palma; Yi-Jun Jen; Akhlesh Lakhtakia, Editor(s)

© SPIE. Terms of Use
Back to Top