Share Email Print
cover

Proceedings Paper

Platinum Kirkpatrik-Baez mirrors for a hard x-ray microfocusing system made by profile coating
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

We report a successful fabrication and testing of the first set of Platinum (Pt)-coated Kirkpatrik-Baez (KB) mirrors for a submicrofocusing x-ray polychromatic beam from a conventional beamline (64 m long) at the 34-ID of Advanced Photon Source (APS). The set includes one 80 mm long mirror and one 40 mm short mirror fabricated by depositing Pt on finely polished spherical Silicon (Si) substrates using the APS-developed profile coating technique with the magnetron sputtering system. Profile coating masks were calculated through the coating profile data from metrology measurements acquired using interferometric stitching technique. Instead of flat substrates, spherical substrates (with shapes approximately mimicking the tangential profiles of the desired ellipses) were used, reducing the coating thickness and, thus, stress. The mirror pair was commissioned on the beamline and generated a 2-D spot with full width at half maximum (FWHM) 280 nm (V) x 150 nm (H). The detailed fabrication methods, metrology measurements, and calculations are discussed.

Paper Details

Date Published: 27 August 2010
PDF: 6 pages
Proc. SPIE 7802, Advances in X-Ray/EUV Optics and Components V, 78020G (27 August 2010); doi: 10.1117/12.861044
Show Author Affiliations
Bing Shi, Argonne National Lab. (United States)
Chian Liu, Argonne National Lab. (United States)
Jun Qian, Argonne National Lab. (United States)
Wenjun Liu, Argonne National Lab. (United States)
Lahsen Assoufid, Argonne National Lab. (United States)
Ali Khounsary, Argonne National Lab. (United States)
Raymond Conley, Brookhaven National Lab. (United States)
Albert T. Macrander, Argonne National Lab. (United States)


Published in SPIE Proceedings Vol. 7802:
Advances in X-Ray/EUV Optics and Components V
Shunji Goto; Ali M. Khounsary; Christian Morawe, Editor(s)

© SPIE. Terms of Use
Back to Top