Share Email Print
cover

Proceedings Paper

Beam splitting mirrors for miniature Fourier transform soft x-ray (FTXR) interferometer
Author(s): Jaroslava Wilcox; Victor White; Kirill Shcheglov; Robert Kowalczyk
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

The development of Fourier Transform (FT) spectral techniques in the soft X-ray spectral region has been advocated in the past as a possible route to constructing a bench-top size spectral imager with high spatial and spectral resolution. The crux of the imager is a soft X-ray interferometer. Auxiliary subsystems include a wide-band soft X-ray source, focusing optics and detection systems. When tuned over a sufficiently large range of path delays, the interferometer will sinusoidally modulate the source spectrum centered at the core wavelength of interest, the spectrum illuminates a target, the reflected signal is imaged onto a CCD, and data acquired for different frames is converted to spectra in software by using FT methods similar to those used in IR spectrometry producing spectral image per each pixel. The use of shorter wavelengths results in dramatic increase in imaging resolution, the modulation across the beam width results in highly efficient use of the beam spectral content, facilitating construction of a bench-top instrument. With the predicted <0.1eV spectral and <100 nm spatial resolution, the imager would be able to map core-level shift spectra for elements such as Carbon, which can be used as a chemical compound fingerprint and imaging intracellular structures. We report on our progress in the development of a Fourier Transform X-ray (FTXR) interferometer. The enabling technology is X-ray beam splitting mirrors. The mirrors are not available commercially; multi layers of quarter-wave films (used in IR and visible) are not suitable, and several efforts by other researchers who used parallel slits met only a very limited success. In contrast, our beam splitters use thin (about 200 nm) SiN membranes perforated with a large number of very small holes prepared in our micro-fabrication laboratory at JPL. Precise control of surface roughness and high planarity are needed to achieve the requisite wave coherency. The beam splitters prepared-to-date had surface RMS and planarity better that <0.3 nm over a 0.45 mm x 1.4 mm area, meeting requirements for spectral imaging at 100eV. Efforts to improve the mirror flatness to a level required for core-level shifts of Carbon are under way.

Paper Details

Date Published: 27 August 2010
PDF: 10 pages
Proc. SPIE 7802, Advances in X-Ray/EUV Optics and Components V, 780206 (27 August 2010); doi: 10.1117/12.859147
Show Author Affiliations
Jaroslava Wilcox, Jet Propulsion Lab. (United States)
Victor White, Jet Propulsion Lab. (United States)
Kirill Shcheglov, Jet Propulsion Lab. (United States)
Robert Kowalczyk, Jet Propulsion Lab. (United States)


Published in SPIE Proceedings Vol. 7802:
Advances in X-Ray/EUV Optics and Components V
Shunji Goto; Ali M. Khounsary; Christian Morawe, Editor(s)

© SPIE. Terms of Use
Back to Top