Share Email Print
cover

Proceedings Paper

Hot slumping glass technology for the grazing incidence optics of future missions with particular reference to IXO
Author(s): M. Ghigo; S. Basso; M. Bavdaz; P. Conconi; O. Citterio; M. Civitani; P. Friedrich; D. Gallieni; B. Guldimann; F. Martelli; R. Negri; G. Pagano; G. Pareschi; G. Parodi; L. Proserpio; B. Salmaso; F. Scaglione; D. Spiga; G. Tagliaferri; L. Terzi; M. Tintori; M. Vongehr; E. Wille; A. Winter; A. Zambra
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

The mirrors of the International X-ray Observatory (IXO) consist of a large number of high quality segments delivering a spatial resolution better than 5 arcsec. A study concerning the slumping of thin glass foils for the IXO mirrors is under development in Europe, funded by ESA and led by the Brera Observatory. We are investigating two approaches, the "Direct" and "Indirect" slumping technologies, being respectively based on the use of convex and concave moulds. In the first case during the thermal cycle the optical surface of the glass is in direct contact with the mould surface, while in the second case it is the rear side of the foil which touches the master. Both approaches present pros and cons and aim of this study is also to make an assessment of both processes and to perform a trade-off between the two. The thin plates are made of D263glass produced by Schott. Each plate is 0.4 mm thick, with a reflecting area of 200 mm x 200 mm; the mould are made of Fused Silica. After the thermal cycle the slumped MPs are characterized to define their optical quality and microroughness. The adopted integration process foresees the bonding of the slumped foils to a rigid backplane by means of reinforcing ribs. During the bonding process the plates are constrained to stay in close contact to the surface of the master (i.e. the same mould used for the hot slumping process) by the application of a vacuum pump suction. In this way spring-back deformations and low frequency errors still present on the foil profile after slumping can be corrected. In this paper we present the preliminary results concerning achieved during the first part of the project.

Paper Details

Date Published: 1 August 2010
PDF: 12 pages
Proc. SPIE 7732, Space Telescopes and Instrumentation 2010: Ultraviolet to Gamma Ray, 77320C (1 August 2010); doi: 10.1117/12.857577
Show Author Affiliations
M. Ghigo, Osservatorio Astronomico di Brera (Italy)
S. Basso, Osservatorio Astronomico di Brera (Italy)
M. Bavdaz, European Space Research and Technology Ctr. (Netherlands)
P. Conconi, Osservatorio Astronomico di Brera (Italy)
O. Citterio, Osservatorio Astronomico di Brera (Italy)
M. Civitani, Osservatorio Astronomico di Brera (Italy)
Insubria Univ. (Italy)
P. Friedrich, Max-Planck-Institut für extraterrestrische Physik (Germany)
D. Gallieni, A.D.S. International S.r.l. (Italy)
B. Guldimann, European Space Research and Technology Ctr. (Netherlands)
F. Martelli, BCV Progetti S.r.l. (Italy)
R. Negri, Osservatorio Astronomico di Brera (Italy)
Politecnico di Milano (Italy)
G. Pagano, Osservatorio Astronomico di Brera (Italy)
Politecnico di Milano (Italy)
G. Pareschi, Osservatorio Astronomico di Brera (Italy)
G. Parodi, BCV Progetti S.r.l. (Italy)
L. Proserpio, Osservatorio Astronomico di Brera (Italy)
Insubria Univ. (Italy)
B. Salmaso, Osservatorio Astronomico di Brera (Italy)
F. Scaglione, Osservatorio Astronomico di Brera (Italy)
Politecnico di Milano (Italy)
D. Spiga, Osservatorio Astronomico di Brera (Italy)
G. Tagliaferri, Osservatorio Astronomico di Brera (Italy)
L. Terzi, Osservatorio Astronomico di Brera (Italy)
Politecnico di Milano (Italy)
M. Tintori, A.D.S. International S.r.l. (France)
M. Vongehr, Max-Planck-Institut für extraterrestrische Physik (Germany)
E. Wille, European Space Research and Technology Ctr. (Netherlands)
A. Winter, Max-Planck-Institut für extraterrestrische Physik (Germany)
A. Zambra, Osservatorio Astronomico di Brera (Italy)


Published in SPIE Proceedings Vol. 7732:
Space Telescopes and Instrumentation 2010: Ultraviolet to Gamma Ray
Monique Arnaud; Stephen S. Murray; Tadayuki Takahashi, Editor(s)

© SPIE. Terms of Use
Back to Top