Share Email Print
cover

Proceedings Paper

The calibration stand for thermal camera module with infrared focal plane array
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

In areas like military systems, surveillance systems, or industrial process control, more and more often there is a need to operate in limited visibility conditions or even in complete darkness. In such conditions vision systems can benefit by using thermal vision cameras. In thermal imaging an infrared radiation detector arrays are used. Contemporary infrared detector arrays suffers from technological imprecision which causes that the response to uniform radiation results in nonuniform image with superimposed fixed pattern noise (FPN). In order to compensate this noise there is a need to evaluate detectors characteristics like responsivity and offset of every detector in array. Some of the detectors in cooled detector arrays can be also defective. Signal from defective pixels has to be in such system replaced. In order to replace defective pixels, there is a need to detect them. Identification of so-called blinking pixels needs long time measurement, which in designed calibration stand is also possible. The paper presents the design of infrared detector array measurement stand allowing measurement of mentioned parameters. Measurement stand was also used to evaluate temporal noise of infrared detection modules. In article there is a description of optical system design and parameters of used reference blackbodies. To capture images from camera modules a specially designed digital image interface was used. Measurement control and calculations were made in specially written IRDiag software. Stand was used to measure parameters for cameras based on cooled focal plane arrays from Sofradir. Results of two-point nonuniformity correction are also presented.

Paper Details

Date Published: 3 May 2010
PDF: 8 pages
Proc. SPIE 7660, Infrared Technology and Applications XXXVI, 76603Y (3 May 2010); doi: 10.1117/12.851144
Show Author Affiliations
Tomasz Sosnowski, Military Univ. of Technology (Poland)
Grzegorz Bieszczad, Military Univ. of Technology (Poland)
Henryk Madura, Military Univ. of Technology (Poland)
Mariusz Kastek, Military Univ. of Technology (Poland)
Krzysztof Firmanty, Military Univ. of Technology (Poland)


Published in SPIE Proceedings Vol. 7660:
Infrared Technology and Applications XXXVI
Bjørn F. Andresen; Gabor F. Fulop; Paul R. Norton, Editor(s)

© SPIE. Terms of Use
Back to Top