Share Email Print
cover

Proceedings Paper

Guided wave generation and sensing system using a single laser source and optical fibers
Author(s): Hyeonseok Lee; Hyun-Jun Park; Hoon Sohn; Il-bum Kwon
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Structural health monitoring (SHM) techniques based on guided waves have been of great interests to many researchers. Among various SHM devices used for guided wave generation and sensing, lead zirconate titanate (PZT) transducers and fiber Bragg grating (FBG) sensors have been widely used because of their light weight, non-intrusive nature and compactness. To best take advantage of their merits, combination of PZT-based guided wave excitation and FBG-based sensing has been attempted by a few researchers. However, the PZT-based actuation and the FBG-based sensing are basically two independent systems in the past studies. This study proposes an integrated PZT/FBG system using a single laser source. Since power and data delivery is based on optical fibers, it may alleviate problems associated with conventional wire cables such as electromagnetic interference (EMI) and power/data attenuation. The experimental procedure for the proposed system is as follows. First, a tunable laser is used as the common power source for guided wave generation and sensing. The tunable laser beam is modulated and amplified to contain an arbitrary waveform. Then, it is transmitted to the PZT transducer node through an optical fiber for guided wave actuation. The transmitted laser beam is also used with the FBG sensor to measure high-speed strain changes induced by guided waves. Feasibility of the proposed technique has been experimentally demonstrated using aluminum plates. The results show that the proposed system could properly generate and sense the guided waves compared to the conventional methods.

Paper Details

Date Published: 31 March 2010
PDF: 12 pages
Proc. SPIE 7647, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2010, 76470R (31 March 2010); doi: 10.1117/12.847807
Show Author Affiliations
Hyeonseok Lee, Korea Advanced Institute of Science and Technology (Korea, Republic of)
Hyun-Jun Park, Korea Advanced Institute of Science and Technology (Korea, Republic of)
Hoon Sohn, Korea Advanced Institute of Science and Technology (Korea, Republic of)
Il-bum Kwon, Korea Research Institute of Standards and Science (Korea, Republic of)


Published in SPIE Proceedings Vol. 7647:
Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2010
Masayoshi Tomizuka, Editor(s)

© SPIE. Terms of Use
Back to Top