Share Email Print

Proceedings Paper

Sn debris cleaning by plasma in DPP EUV source systems for HVM
Author(s): H. Shin; V. Surla; M. J. Neumann; D. N. Ruzic
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

The tin (Sn) debris contamination is one of the technical challenges for the development of high power EUV light source with Sn fuel with a long lifetime of EUV collectors. The debris mitigation techniques (DMTs) can considerably minimize the Sn debris coming out of the source thereby reducing the need or effort for cleaning. However, for HVM, which requires higher EUV power output than today, it is questionable if the DMTs alone will completely eliminate the Sn contamination. Besides, at abnormal instances, we also need to clean thick Sn debris from the mirror surface. For this purpose, the Center for Plasma-Material Interactions (CPMI) at University of Illinois at Urbana-Champaign has developed a plasma-based Sn cleaning method using chlorine plasma with densities and temperature around ~9×109/cm3 and ~ 4 eV respectively. From the previous studies at CPMI, it was shown that chlorine plasma etching can remove Sn debris from Ru mirror surface in a fast (> 400 nm/min) and in situ manner. In this study, we applied the same method to clean Sn contamination on the mock-up collector in our XTS13-35 DPP EUV source system. The mock-up is made of two shells with different gap widths (4 cm, 7.5 cm and 10 cm) in similar size with the actual collector optic. The cleaning rate at different locations on the mockup was experimentally investigated, and it was found that the cleaning rates vary largely with the distance from the chlorine plasma in the range of 20 - 100 nm/min. In addition, a simple analytical model to predict the cleaning rate was developed based on the plasma-surface reactions and the plasma transport. The model describes how plasma transport, chlorine radical distribution and pumping flow affect the Sn cleaning rate with chlorine plasma. Finally, the model is then compared to the experimental results and validated. Based on the knowledge of chlorine plasma and Sn interactions obtained in this study, a remote plasma cleaning technique was also investigated and the results obtained therein are presented. The experimental results along with the model predictions will help design an integrated cleaning system for collector optic in the high power EUV source system for HVM.

Paper Details

Date Published: 19 March 2010
PDF: 10 pages
Proc. SPIE 7636, Extreme Ultraviolet (EUV) Lithography, 76360B (19 March 2010); doi: 10.1117/12.846359
Show Author Affiliations
H. Shin, Univ. of Illinois at Urbana-Champaign (United States)
V. Surla, Univ. of Illinois at Urbana-Champaign (United States)
M. J. Neumann, Univ. of Illinois at Urbana-Champaign (United States)
D. N. Ruzic, Univ. of Illinois at Urbana-Champaign (United States)

Published in SPIE Proceedings Vol. 7636:
Extreme Ultraviolet (EUV) Lithography
Bruno M. La Fontaine, Editor(s)

© SPIE. Terms of Use
Back to Top