Share Email Print
cover

Proceedings Paper

Measurement of inner and/or outer profiles of pipes using ring beam devices
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Inner profile measurement is an important matter in such fields as medicine, dentistry and anthropology as well as mechanical engineering and industry. Here we propose a measurement method for inner diameter of pipes and/or holes. The key device in this technique is a ring beam device which consists of a conical mirror and a laser diode. And the fundamental principle is based on optical sectioning without any contact probe. The optically sectioned profile of an inner wall of a pipe-like object is analyzed to give the inner profile in addition to the inner diameter. This optical instrument with a simple and small configuration is now under development for practical uses. In the hitherto-tried experimental works, the availability of this instrument has been highly evaluated and usability for practical applications is expected, especially, for measurement and inspection of mechanical components and elements besides pipes. This ring beam device consisting of a conical mirror and a LD is assembled to form a disklike light beam sheet. We show measurement result of pipes and holes, and, at the same time, report a compact inner profile measuring instrument. Both the ring beam device and a miniaturized CCD camera are fabricated in a glass tube. Availability of this instrument is shown by measuring the inner profiles of various pipes. In response to this trial, there appeared a strong request that not only the internal but external profiles should be measured simultaneously. Therefore we propose an improved method for measuring the external profile in addition to the internal profile. In our arrangement, one pair of concaved conical mirrors is used for the external profile measurement. In combination with the inner profile measurement technique, simultaneous measurement of the inner and outer profiles becomes attainable. A measurement result on a bevel gear shows availability of newly proposed principle. Now we are aiming to realize simultaneous measurement of the internal and external profiles of various types of pipes and similar objects.

Paper Details

Date Published: 24 November 2009
PDF: 8 pages
Proc. SPIE 7513, 2009 International Conference on Optical Instruments and Technology: Optoelectronic Imaging and Process Technology, 751306 (24 November 2009); doi: 10.1117/12.838194
Show Author Affiliations
T. Wakayama, Saitama Medical Univ. (Japan)
T. Yoshizawa, Saitama Medical Univ. (Japan)


Published in SPIE Proceedings Vol. 7513:
2009 International Conference on Optical Instruments and Technology: Optoelectronic Imaging and Process Technology
Toru Yoshizawa; Ping Wei; Jesse Zheng, Editor(s)

© SPIE. Terms of Use
Back to Top