Share Email Print
cover

Proceedings Paper

Study on the characteristics of an Er/Yb co-doped double cladding fiber laser
Author(s): Zhou Qu; Mingliang Yan
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

An Er/Yb co-doped double cladding fiber laser pumped at 980 nm was optimized. The double-cladding fiber laser with whole fiber was obtained by end-pumping and utilizing fiber bragg grating as a resonator. The output power of laser was analyzed along the changes of output grating reflectance (L=10m) as well as the fiber length (R2=4%). Consequently, a fiber with 4 m Er / Yb co-doped double cladding was employed as gain medium while a fiber of which the reflectance was approximately 15% was used as output resonator mirror. Thereafter the technical indexes of EYDF(Er / Yb Double cladding Fiber) were measured. The absorption maximum of fiber core Er3+ was higher than 30dB/m and material gain maximum was observed at 1535nm. Moreover, the diameters of fiber core and inner cladding of double-cladding fiber grating were 6μm and 125μm respectively however the diameters of fiber core and inner cladding of Er/Yb co-doped double cladding fiber were 7μm and 130μm separately.According to the experimental data, a fiber laser with 4 m Er / Yb co-doped double cladding and launched maximum pump power of 3.4 W was set up. Proposed laser shows the maximum output power of 1.25 W and slope efficiency of 40%.

Paper Details

Date Published: 28 August 2009
PDF: 7 pages
Proc. SPIE 7382, International Symposium on Photoelectronic Detection and Imaging 2009: Laser Sensing and Imaging, 73820T (28 August 2009); doi: 10.1117/12.834998
Show Author Affiliations
Zhou Qu, Armor Technique Insititute of PLA (China)
Mingliang Yan, Armor Technique Institute of PLA (China)


Published in SPIE Proceedings Vol. 7382:
International Symposium on Photoelectronic Detection and Imaging 2009: Laser Sensing and Imaging
Farzin Amzajerdian; Chun-qing Gao; Tian-yu Xie, Editor(s)

© SPIE. Terms of Use
Back to Top