Share Email Print
cover

Proceedings Paper

Study on a transient optical fiber high temperature measurement system
Author(s): Lulu Cai; Yusha Liu; Yutian Wang
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

High temperature is one of the most important parameters in the fields of scientific research and industrial production. At present, thermocouple, thermo resistive and radiance thermometer are already technologically mature which can be adopted to measure the general temperature, but when it comes to the transient high temperature that changes pretty quickly in wretched conditions, those traditional pyrometers can not meet the requirements any more. In this paper, we designed a transient optical high temperature measurement system. First, design of the temperature measurement probe. The system took blackbody cavity sensor together with optical fiber to receive the measured signal, here, the integrated emissivity model of the blackbody cavity was established and the optimum structure parameters were confirmed. Secondly, design of the entire temperature measurement system. A contact-noncontact measurement method was applied, which is to make the blackbody cavity and the measured high-temperature source contact, the fiber probe and the blackbody cavity noncontact, as a result, the error caused by contact measurement is overcame and the precision is guaranteed at the same time. In addition, a fiber grating was introduced as the wavelength filter device which can realize the dynamic filter of narrow-band signals and reduce the impact of background light. Thirdly, signal processing. In this part, we applied labVIEW software and wavelet analysis method. All of the signal acquisition and processing were realized in the labVIEW environment. Through calling matlab in labVIEW, the signals from optical fiber detector were wavelet denoised and decomposed, thus the temperature information was extracted, and the temperature value was obtained. On basis of wavelet transformation, the paper adopted the 4dB wavelet with horizontal scale of 5 to realize the feature extraction and noise removal, parts of the signals before and after the wavelet noise removal were given and analyzed. Finally, the experimental result shows: the resolution is 1°C,the measurement range is 500~2000°C and the dynamic response time is 5s.In view of possessing a high precision and resolution, resisting high temperature and corrosion, and being able to realize the continuous measurement of the dynamic temperature, this transient optical fiber high temperature measurement system can be applied widely in the continuous temperature measurement of molten steel and heating furnace kiln temperature measurement and so many other fields of engineering technology.

Paper Details

Date Published: 24 August 2009
PDF: 8 pages
Proc. SPIE 7381, International Symposium on Photoelectronic Detection and Imaging 2009: Material and Device Technology for Sensors, 73811X (24 August 2009); doi: 10.1117/12.834971
Show Author Affiliations
Lulu Cai, Yanshan Univ. (China)
Yusha Liu, Yanshan Univ. (China)
Yutian Wang, Yanshan Univ. (China)


Published in SPIE Proceedings Vol. 7381:
International Symposium on Photoelectronic Detection and Imaging 2009: Material and Device Technology for Sensors
Xu-yuan Chen; Yue-lin Wang; Zhi-ping Zhou; Qing-kang Wang, Editor(s)

© SPIE. Terms of Use
Back to Top