Share Email Print
cover

Proceedings Paper

Tolerancing panoramic lenses
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Tolerancing a lens is a basic procedure in lens design. It consists in first defining an appropriate set of tolerances for the lens, then in adding compensators with their allowable ranges and finally in selecting an appropriate quality criterion (MTF, RMS spot size, wavefront error, boresight error...) for the given application. The procedure is straightforward for standard optical systems. However, it becomes more complex when tolerancing very wide angle lenses (larger than 150 degrees). With a large field of view, issues such as severe off-axis pupil shift, considerable distortion and low relative illumination must be addressed. The pupil shift affects the raytrace as some rays can no longer be traced properly. For high resolution imagers, particularly for robotic and security applications, the image footprint is most critical in order to limit or avoid complex calibration procedures. We studied various wide angle lenses and concluded that most of the distortion comes from the front surface of the lens. Consequently, any variation of the front surface will greatly affect the image footprint. In this paper, we study the effects on the image footprint of slightly modifying the front surface of four different lenses: a simple double-gauss for comparison, a fisheye lens, a catadioptric system (omnidirectional lens) and a Panomorph lens. We also present a method to analyze variations of the image footprint. Our analysis shows that for wide angle lenses, on which the entrance pupil is much smaller than the front surface, irregularities (amplitude, slope and location) are critical on both aspherical and spherical front surfaces to predict the image footprint variation for high resolution cameras. Finally, we present how the entrance pupil varies (location, size) with the field of view for these optical systems.

Paper Details

Date Published: 21 August 2009
PDF: 10 pages
Proc. SPIE 7433, Optical System Alignment, Tolerancing, and Verification III, 74330D (21 August 2009); doi: 10.1117/12.826139
Show Author Affiliations
Jocelyn Parent, Laval Univ. (Canada)
Simon Thibault, Laval Univ. (Canada)


Published in SPIE Proceedings Vol. 7433:
Optical System Alignment, Tolerancing, and Verification III
José Sasián; Richard N. Youngworth, Editor(s)

© SPIE. Terms of Use
Back to Top