Share Email Print
cover

Proceedings Paper

Retroreflector for photonic Doppler velocimetry
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

In order to meet the goals of the Department of Defense (DoD) for smaller and more accurate weapons, numerous projects are currently investigating the miniaturization of weapons and munition fuze components. One of these efforts is to characterize the performance of small detonators. The velocity of the flyer, the key component needed to initiate a detonation sequence, can be measured using a photonic Doppler velocimeter (PDV). The purpose of this research was to develop a microelectromechanical system (MEMS) device that would act as an optimal retroreflective surface for the PDV. Two MEMS solutions were explored: one using the PolyMUMPsTM fabrication process and one in-house fabrication design using silicon on insulator (SOI) wafers. The in-house design consisted of an array of corner reflectors created using an SOI wafer. Each corner reflector consisted of three separate mirror plates which were self-assembled by photoresist pad hinges. When heated to a critical temperature (typically 140-160 °C), the photoresist pads melted and the resulting surface tension caused each mirror to rotate into place. The resulting array of corner reflectors was then coated with a thin layer of gold to increase reflectivity. Despite the successful assembly of a PolyMUMPsTM corner reflector, assembling an array of these reflectors was found to be unfeasible. Although the SOI corner reflector design was completed, these devices were not fabricated in time for testing during this research. However, the bidirectional reflectance distribution function (BRDF) and optical cross section (OCS) of commercially available retroreflective tapes were measured. These results can be used as a baseline comparison for future testing of a fabricated SOI corner reflector array.

Paper Details

Date Published: 24 August 2009
PDF: 12 pages
Proc. SPIE 7468, Adaptive Coded Aperture Imaging, Non-Imaging, and Unconventional Imaging Sensor Systems, 74680I (24 August 2009); doi: 10.1117/12.826046
Show Author Affiliations
Thomas J. Lagoski, Air Force Institute of Technology (United States)
Ronald A. Coutu, Air Force Institute of Technology (United States)
LaVern A. Starman, Air Force Institute of Technology (United States)


Published in SPIE Proceedings Vol. 7468:
Adaptive Coded Aperture Imaging, Non-Imaging, and Unconventional Imaging Sensor Systems
David P. Casasent; Jean J. Dolne; Stanley Rogers; Thomas J. Karr; Victor L. Gamiz, Editor(s)

© SPIE. Terms of Use
Back to Top