Share Email Print

Proceedings Paper

Contractive tension force stack actuator based on soft dielectric EAP
Author(s): Gabor Kovacs; Lukas Düring
Format Member Price Non-Member Price
PDF $17.00 $21.00

Paper Abstract

Among the electronic polymers EAPs especially the dielectric elastomers are functional materials that have promising potential as muscle-like actuators due to their inherent compliancy and good overall performance. The combination of huge active deformations, high energy densities, good efficiencies and fast response is unique to dielectric elastomers. Furthermore, they are lightweight, have a simple structure and can be easily tailored to various applications. Up to now most scientific research work has been focused on the planar expanding actuation mode due to the fact that the commercially available acrylic material VHB 4910 (3M) can easily be processed to planar actuators and has demonstrated very high actuation performance when pre-strained. Many different actuator designs have been developed and tested which expands in plane when voltage is applied and shrinks back as soon as the applied charges are removed from the electrodes. Obviously the contractive operation mode at activation is required for a wide range of application. Due to the principle of operation of soft DE EAP, mainly two directions to performed work against external loads are possible. Beside of the commonly used expanding actuation in planar direction the contractile actuation in thickness direction of the DE film represents a very promising option in the multilayer configuration. First approaches have been presented by the folded actuator design and by the multilayer tactile display device. In this study a novel approach for active structures driven by soft dielectric EAP is presented, which can perform contractive displacements at external tensile load. The device is composed of an array of equal segments, where the dielectric films are arranged in a pile-up configuration. In order to maintain satisfying structural integrity when external tension load is applied special attention was paid to the compliant electrode design which takes a central importance concerning the force transmission capability between each layer of the actuator. Due to the stack configuration of the actuator the commonly used and pre-strained acrylic film was replaced by the stress-free IPN modified acrylic film in order to eliminate the need for external pre-strain-supporting structures. Introductorily, the specific problems on conventional expanding actuators are discussed and the aims for contractive tension force actuators are specified. Then some structural design parameters are addressed in order to achieve a high rate of yield and reliable working principle. In the main part of the study the manufacturing process of the actuators and some measurement results and experiences are discussed in detail.

Paper Details

Date Published: 6 April 2009
PDF: 15 pages
Proc. SPIE 7287, Electroactive Polymer Actuators and Devices (EAPAD) 2009, 72870A (6 April 2009); doi: 10.1117/12.815195
Show Author Affiliations
Gabor Kovacs, EMPA (Switzerland)
Lukas Düring, EMPA (Switzerland)

Published in SPIE Proceedings Vol. 7287:
Electroactive Polymer Actuators and Devices (EAPAD) 2009
Yoseph Bar-Cohen; Thomas Wallmersperger, Editor(s)

© SPIE. Terms of Use
Back to Top