Share Email Print
cover

Proceedings Paper

Determination of flatness on patterned wafer surfaces using wavefront sensing methods
Author(s): A. Nutsch; L. Pfitzner; T. Grandin; X. Levecq; S. Bucourt
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

New lithography technologies, as for example Extreme Ultra Violet (EUV), require high flatness on the exposure surfaces as the depth of focus is impacted. It is essential for semiconductor manufacturing to measure and control flatness of wafer surfaces at nanometer scale. In-plane geometrical defects on wafer surfaces following Chemical Mechanical Planarization (CMP) processing in the lateral millimeter range and in vertical dimensions in the nanometer range are of increasing importance. They will become a severe yield limiting factor in the 32 nm generations and below. This paper shows the result from improvement and optimization of metrology using wavefront sensing methods according to Makyoh and Shack Hartmann. Magnification and increased density of measurement points were identified to improve the existing performance with respect to vertical resolution significantly below 100 nm. The achieved lateral resolution on the wafer surface was 750 μm. The accuracy of the measurement on patterned wafer surfaces was determined to be less than 15 nm. The accuracy was determined by repeating the topography measurement and filtering of the according data of the sensors using cross section analysis and spatial processing with double Gaussian filters. The samples were taken from different manufacturing steps, such as Shallow Trench Isolation (STI) and interconnect metallization. Wavefront sensing based on methods according to Makyoh and Shack Hartmann enabled instantaneous and non-destructive flatness measurement of surfaces.

Paper Details

Date Published: 3 October 2008
PDF: 12 pages
Proc. SPIE 7155, Ninth International Symposium on Laser Metrology, 71550Z (3 October 2008); doi: 10.1117/12.814535
Show Author Affiliations
A. Nutsch, Fraunhofer IISB (Germany)
L. Pfitzner, Fraunhofer IISB (Germany)
T. Grandin, Imagine Optic (France)
X. Levecq, Imagine Optic (France)
S. Bucourt, Imagine Optic (France)


Published in SPIE Proceedings Vol. 7155:
Ninth International Symposium on Laser Metrology
Chenggen Quan; Anand Asundi, Editor(s)

© SPIE. Terms of Use
Back to Top