Share Email Print
cover

Proceedings Paper

Using scatterometry to improve process control during the spacer pitch splitting process
Author(s): Scott Corboy; Craig MacNaughton; Thomas Gubiotti; Marcus Wollenweber
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

In an effort to keep scaling at the speed of Moore's law, novel methods are being developed to facilitate advanced semiconductor manufacturing at the 32nm node and beyond. One such method for enabling the creation of dense pitches beyond the current lithography resolution limit is spacer pitch splitting. This method typically involves patterning a sacrificial gate pattern, then performing a standard spacer deposition and etch back process, after which the sacrificial gate is removed and the remaining spacers themselves are used as the effective mask for the pattern transfer. Some of the key advantages of this process are the ability to create sub-resolution lines and also the improvement in Line Edge Roughness seen on the final pattern. However, there are certain limitations with this process, namely the ability to only pattern lines in one dimension, and also the complexity of the metrology, where the final Critical Dimension result is a function of the lithography condition from the sacrificial gate patterning, and also the various film layer depositions as well as the spacer etch back process. Given this complexity, the accurate measurement of not only the spacer width but also the spacer shape is important. In this work we investigate the use of scatterometry techniques to enable these measurements on leading edge devices.

Paper Details

Date Published: 23 March 2009
PDF: 10 pages
Proc. SPIE 7272, Metrology, Inspection, and Process Control for Microlithography XXIII, 727245 (23 March 2009); doi: 10.1117/12.814349
Show Author Affiliations
Scott Corboy, KLA-Tencor Corp. (United States)
Craig MacNaughton, KLA-Tencor Corp. (United States)
Thomas Gubiotti, KLA-Tencor Corp. (United States)
Marcus Wollenweber, KLA-Tencor Corp. (United States)


Published in SPIE Proceedings Vol. 7272:
Metrology, Inspection, and Process Control for Microlithography XXIII
John A. Allgair; Christopher J. Raymond, Editor(s)

© SPIE. Terms of Use
Back to Top