Share Email Print
cover

Proceedings Paper

EUV resist processing in vacuum
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

In extreme ultraviolet (EUV) lithography, exposures are and can only be performed in vacuum (<1x10-5 Pa). At present though, conventional resist processing technologies before and after exposure (coating, post application bake, post exposure bake, etc.) are performed in atmospheric pressures. Investigations on the possibility of a EUV-specialized resist processing system; specifically, the development of a 300mm wafer compatible, vacuum-based resist baking and cooling system is presented. Comparative evaluations with conventional atmospheric-based systems were made from the viewpoint of resist lithographic performance (sensitivity, resolution, line width roughness) and resist outgassing rate. As a result, an improvement in LWR was also observed in vacuum post application bake and post exposure bake. However, a difference in resist lithographic performance depending on the type of resist material used was observed between resist processes performed in-atmosphere and in-vacuum. Lastly, the vacuum based bake process was found to have no significant effect on resist outgassing rate released.

Paper Details

Date Published: 1 April 2009
PDF: 7 pages
Proc. SPIE 7273, Advances in Resist Materials and Processing Technology XXVI, 72731Q (1 April 2009); doi: 10.1117/12.813365
Show Author Affiliations
Koji Kaneyama, Semiconductor Leading Edge Technologies, Inc. (Japan)
Shinji Kobayashi, Semiconductor Leading Edge Technologies, Inc. (Japan)
Toshiro Itani, Semiconductor Leading Edge Technologies, Inc. (Japan)


Published in SPIE Proceedings Vol. 7273:
Advances in Resist Materials and Processing Technology XXVI
Clifford L. Henderson, Editor(s)

© SPIE. Terms of Use
Back to Top