Share Email Print
cover

Proceedings Paper

Quantitative analysis with the optoacoustic/ultrasound system OPUS
Author(s): Christoph Haisch; Karin Zell; Jonathan Sperl; Mika W. Vogel; Reinhard Niessner
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

The OPUS (Optoacoustic plus Ultrasound) system is a combination of a medical ultrasound scanner with a highrepetition rate, wavelength-tunable laser system and a suitable triggering interface to synchronize the laser and the ultrasound system. The pulsed laser generates an optoacoustic (OA), or photoacoustic (PA), signal which is detected by the ultrasound system. Alternatively, imaging in conventional ultrasound mode can be performed. Both imaging modes can be superimposed. The laser light is coupled into the tissue laterally, parallel to the ultrasound transducer, which does not require for any major modification to the transducer or the ultrasound beam forming. This was a basic requirement on the instrument, as the intention of the project was to establish the optoacoustic imaging modality as add-on to a conventional standard ultrasound instrument. We believe that this approach may foster the introduction of OA imaging as routine tool in medical diagnosis. Another key aspect of the project was to exploit the capabilities of OA imaging for quantitative analysis. The intention of the presented work is to summarize all steps necessary to extract the significant information from the PA raw data, which are required for the quantification of local absorber distributions. We show results of spatially resolved absorption measurements in scattering samples and a comparison of four different image reconstruction algorithms, regarding their influence on lateral resolution as well as on the signal to noise ratio for different sample depths and absorption values. The reconstruction algorithms are based on Fourier transformation, on a generalized 2D Hough transformation, on circular back-projection and the classical delay-and-sum approach which is implemented in most ultrasound scanners. Furthermore, we discuss the influence of a newly developed laser source, combining diode and flash lamp pumping. Compared to all-flash-lamp pumped systems it features a significantly higher pulse-to-pulse stability, which is required for sensitive and precise quantitative analyses.

Paper Details

Date Published: 25 February 2009
PDF: 9 pages
Proc. SPIE 7177, Photons Plus Ultrasound: Imaging and Sensing 2009, 717702 (25 February 2009); doi: 10.1117/12.810739
Show Author Affiliations
Christoph Haisch, Technische Univ. München (Germany)
Karin Zell, Technische Univ. München (Germany)
Jonathan Sperl, GE Global Research (Germany)
Mika W. Vogel, GE Global Research (Germany)
Reinhard Niessner, Technische Univ. München (Germany)


Published in SPIE Proceedings Vol. 7177:
Photons Plus Ultrasound: Imaging and Sensing 2009
Alexander A. Oraevsky; Lihong V. Wang, Editor(s)

© SPIE. Terms of Use
Back to Top