Share Email Print
cover

Proceedings Paper

Lithography performance and simulation accuracy at different polarization states for sub 40nm node
Author(s): Ki-Yeop Park; Ho-young Kang; Gratiela Isai; Khalid Elbattay; Peter van Oorschot; Stuart Young; Seung-Chul Oh; Young-Hong Min; Sung-Goo Hong; Youn-Tak Park
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

The imaging performances of XY linear and TE Azimuthal polarization were compared by thin mask approximation and rigorous 3D mask simulation. The simulations were performed for 40nm and 44nm half pitch patterns with a hyper NA (1.35) system. Each polarization state was assumed to have a parametric DOP (degree of polarization) value that was set to 0.95. Rotated dipole illuminators of several angles were used for the associated tilted patterns to see the imaging impact by IPS (intensity in the preferred state of polarization) change in the process with XY linear polarization that has a fixed angle of polarization. The difference in performance between two polarization modes were compared by NILS and DOF margin. Additionally, the imaging quality of BIM (binary intensity mask) with polarization beam was studied to that of att-PSM at given process conditions. Two types of available BIM masks of different thickness were applied to simulation to understand 3D mask simulation impact on the imaging contrast and process margin. The estimation of two-diffraction beam balance was performed to explain the imaging simulation as well. The polarization sensitivities of NILS and CD change by DOP were found for each feature with given exposure conditions. The main purpose of this study is to understand how much overestimation or underestimation of conventional thin mask simulation could be combined in the process simulation by comparing rigorous 3D mask consideration.

Paper Details

Date Published: 4 December 2008
PDF: 8 pages
Proc. SPIE 7140, Lithography Asia 2008, 71403N (4 December 2008); doi: 10.1117/12.804732
Show Author Affiliations
Ki-Yeop Park, ASML Korea Co., Ltd. (South Korea)
Ho-young Kang, ASML US (United States)
Gratiela Isai, ASML Netherlands B.V. (Netherlands)
Khalid Elbattay, ASML Netherlands B.V. (Netherlands)
Peter van Oorschot, ASML Netherlands B.V. (Netherlands)
Stuart Young, ASML Netherlands B.V. (Netherlands)
Seung-Chul Oh, ASML Korea Co., Ltd. (South Korea)
Young-Hong Min, ASML Korea Co., Ltd. (South Korea)
Sung-Goo Hong, ASML Korea Co., Ltd. (South Korea)
Youn-Tak Park, ASML Korea Co., Ltd. (South Korea)


Published in SPIE Proceedings Vol. 7140:
Lithography Asia 2008
Alek C. Chen; Burn Lin; Anthony Yen, Editor(s)

© SPIE. Terms of Use
Back to Top