Share Email Print
cover

Proceedings Paper

A rapid protection switching method in carrier ethernet ring networks
Author(s): Liang Yuan; Meng Ji
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Abstract: Ethernet is the most important Local Area Network (LAN) technology since more than 90% data traffic in access layer is carried on Ethernet. From 10M to 10G, the improving Ethernet technology can be not only used in LAN, but also a good choice for MAN even WAN. MAN are always constructed in ring topology because the ring network could provide resilient path protection by using less resource (fibre or cable) than other network topologies. In layer 2 data networks, spanning tree protocol (STP) is always used to protect transmit link and preventing the formation of logic loop in networks. However, STP cannot guarantee the efficiency of service convergence when link fault happened. In fact, convergent time of networks with STP is about several minutes. Though Rapid Spanning Tree Protocol (RSTP) and Multi-Spanning Tree Protocol (MSTP) improve the STP technology, they still need a couple of seconds to achieve convergence, and can not provide sub-50ms protection switching. This paper presents a novel rapid ring protection method (RRPM) for carrier Ethernet. Unlike other link-fault detection method, it adopts distributed algorithm to detect link fault rapidly (sub-50ms). When networks restore from link fault, it can revert to the original working state. RRPM can provide single ring protection and interconnected ring protection without the formation of super loop. In normal operation, the master node blocks the secondary port for all non-RRPM Ethernet frames belonging to the given RRPM Ring, thereby avoiding a loop in the ring. When link fault happens, the node on which the failure happens moves from the "ring normal" state to the "ring fault" state. It also sends "link down" frame immediately to other nodes and blocks broken port and flushes its forwarding database. Those who receive "link down" frame will flush forwarding database and master node should unblock its secondary port. When the failure restores, the whole ring will revert to the normal state. That is block secondary port on master node for loop avoidance. Ethernet rings may be interconnected through dual nodes with a shared link. In this case, we should fix that which ring on the share link is ctrl-ring, and only ctrl-ring can deal with the failure happens on the share link. Carrier Ethernet is an alternative for traditional MAN technologies. Ethernet ring network which can make CE more reliable is one of the hottest topics in recently years. RRPM can provide protection switching in sub-50ms and process link fault on single ring and interconnected rings.

Paper Details

Date Published: 19 November 2008
PDF: 8 pages
Proc. SPIE 7137, Network Architectures, Management, and Applications VI, 713711 (19 November 2008); doi: 10.1117/12.804155
Show Author Affiliations
Liang Yuan, Wuhan Research Institute of Posts and Telecommunications (China)
State Key Lab. for New Optical Communication Technologies and Networks (China)
Meng Ji, Wuhan Research Institute of Posts and Telecommunications (China)
State Key Lab. for New Optical Communication Technologies and Networks (China)


Published in SPIE Proceedings Vol. 7137:
Network Architectures, Management, and Applications VI
Weisheng Hu; Shoa-Kai Liu; Ken-ichi Sato; Lena Wosinska, Editor(s)

© SPIE. Terms of Use
Back to Top