Share Email Print
cover

Proceedings Paper

Design and laboratory validation of a structural element instrumented with multiplexed interferometric fiber optic sensors
Author(s): Daniele Zonta; Matteo Pozzi; Huayong Wu; Daniele Inaudi
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

This paper introduces a concept of smart structural elements for the real-time condition monitoring of bridges. These are prefabricated reinforced concrete elements embedding a permanent sensing system and capable of self-diagnosis when in operation. The real-time assessment is automatically controlled by a numerical algorithm founded on Bayesian logic: the method assigns a probability to each possible damage scenario, and estimates the statistical distribution of the damage parameters involved (such as location and extent). To verify the effectiveness of the technology, we produced and tested in the laboratory a reduced-scale smart beam prototype. The specimen is 3.8 m long and has cross-section 0.3 by 0.5m, and has been prestressed using a Dywidag bar, in such a way as to control the preload level. The sensor system includes a multiplexed version of SOFO interferometric sensors mounted on a composite bar, along with a number of traditional metal-foil strain gauges. The method allowed clear recognition of increasing fault states, simulated on the beam by gradually reducing the prestress level.

Paper Details

Date Published: 8 April 2008
PDF: 12 pages
Proc. SPIE 6932, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2008, 69322M (8 April 2008); doi: 10.1117/12.779508
Show Author Affiliations
Daniele Zonta, Univ. of Trento (Italy)
Matteo Pozzi, Univ. of Trento (Italy)
Huayong Wu, Univ. of Trento (Italy)
Daniele Inaudi, SMARTEC SA (Switzerland)


Published in SPIE Proceedings Vol. 6932:
Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2008
Masayoshi Tomizuka, Editor(s)

© SPIE. Terms of Use
Back to Top