Share Email Print
cover

Proceedings Paper

Integrated design method of MR damper and electromagnetic induction system for structural control
Author(s): Heon-Jae Lee; Seok-Jun Moon; Hyung-Jo Jung; Young-Cheol Huh; Dong-Doo Jang
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Magnetorheological (MR) dampers are one of the most advantageous control devices for civil engineering applications to natural hazard mitigation due to many good features such as small power requirement, reliability, and low price to manufacture. To reduce the responses of a structural system by using MR dampers, a control system including a power supply, control algorithm, and sensors is needed. The control system becomes complex, however, when a lot of MR dampers are applied to large-scale civil structures, such as cable-stayed bridges and high-rise buildings. Thus, it is difficult to install and/or maintain the MR damper-based control system. To overcome the above difficulties, a smart passive system was proposed, which is based on an MR damper system. The smart passive system consists of an MR damper and an electromagnetic induction (EMI) system that uses a permanent magnet and a coil. According to the Faraday law of induction, the EMI system that is attached to the MR damper can produce electric energy and the produced energy is applied to the MR damper to vary the damping characteristics of the damper. Thus, the smart passive system does not require any power at all. Besides the output of electric energy is proportional to input loads such as earthquakes, which means the smart passive system has adaptability by itself without any controller or sensors. In this paper, the integrated design method of a large-scale MR damper and Electromagnetic Induction (EMI) system is presented. Since the force of an MR damper is controllable by altering the input current generated from an EMI part, it is necessary to design an MR damper and an EMI part simultaneously. To do this, design parameters of an EMI part consisting of permanent magnet and coil as well as those of an MR damper consisting of a hydraulic-type cylinder and a magnetic circuit that controls the magnetic flux density in a fluid-flow path are considered in the integrated design procedure. As an example, a smart passive control system for reducing stay cable responses is considered in this investigation and it will be fabricated and tested through experiment in the future.

Paper Details

Date Published: 8 April 2008
PDF: 10 pages
Proc. SPIE 6932, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2008, 69320S (8 April 2008); doi: 10.1117/12.776160
Show Author Affiliations
Heon-Jae Lee, Korea Advanced Institute of Science and Technology (South Korea)
Seok-Jun Moon, Korea Institute of Machinery and Materials (South Korea)
Hyung-Jo Jung, Korea Advanced Institute of Science and Technology (South Korea)
Young-Cheol Huh, Korea Institute of Machinery and Materials (South Korea)
Dong-Doo Jang, Korea Advanced Institute of Science and Technology (South Korea)


Published in SPIE Proceedings Vol. 6932:
Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2008
Masayoshi Tomizuka, Editor(s)

© SPIE. Terms of Use
Back to Top