Share Email Print
cover

Proceedings Paper

EUV optics contamination studies in presence of selected hydrocarbons
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

One of the remaining challenges for the commercialization of EUV lithography is the lifetime of the Mo/Si multilayer optics and masks. The lifetime is dominated by carbon contamination on the surfaces of the optics, which is caused by residual hydrocarbons in the vacuum chamber when optics are exposed to EUV radiation. One of the possible sources of the hydrocarbons in the chamber is resist outgassing. To be able to understand which type of hydrocarbons are harmful to EUV mirror reflectivity, three hydrocarbon species - benzene, tert-butanol and diphenyl sulfide - which are thought to be representative of commonly outgassed species from EUV photoresist were selected. The goal of this work was to measure the contamination rate from these three species and to be able to draw conclusions about other species. The results of the experiments showed that after 8 hours of exposure there was not enough contamination to be significantly measurable. In addition to these hydrocarbon species, we also used vacuum grease and carbon tape as an outgassing source for hydrocarbons. Comparatively, high contamination rates were achieved with vacuum grease and carbon tape.

Paper Details

Date Published: 1 April 2008
PDF: 8 pages
Proc. SPIE 6921, Emerging Lithographic Technologies XII, 692136 (1 April 2008); doi: 10.1117/12.772770
Show Author Affiliations
R. Garg, Univ. at Albany (United States)
A. Wüest, SEMATECH (United States)
E. Gullikson, Lawrence Berkeley National Lab. (United States)
S. Bajt, DESY (Germany)
G. Denbeaux, Univ. at Albany (United States)


Published in SPIE Proceedings Vol. 6921:
Emerging Lithographic Technologies XII
Frank M. Schellenberg, Editor(s)

© SPIE. Terms of Use
Back to Top