Share Email Print
cover

Proceedings Paper

Concurrent development methodology from design rule to OPC in 45-nm node logic device
Author(s): Kenji Konomi; Shigeki Nojima; Shimon Maeda; Takeshi Fujimaki; Hirofumi Igarashi; Ryuji Ogawa; Shoji Mimotogi
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Design rules for logic device have been defined by technology requirement like shrink rate of chip area or process capability of lithography and other processes. However, those rules are usually only for minimum pitches or minimum sizes of simple layout, such as line and space patterns with enough long common run length, no intermediate corners, no jogs and no asymmetry patterns. On the other hand, actual chip layout includes many variations of pattern which often cause trouble in wafer manufacturing process due to their less process capability, would be found far later when the design rules are fixed. To solve this issue, additional design rules for two-dimensional patterns, such as line-end to lineend space, are necessary and have been applied into recent design rules. It is hard to check such many variations of pattern by the experiment with actual wafer, so checking by lithography simulation in advance is very effective way to estimate and fix design rules for these two dimensional patterns. To estimate rules with accuracy, and to minimize numbers in each rule for chip area reduction, OPC and RET must be included in the estimation, particularly for recent low-k1 lithography. However, OPC and RET are also immature in the early development term, when design rules are necessary for designers to prepare a test mask to develop the device, process and some parts of circuit. In other words, OPC, RET and design rules have been modified in parallel, sometime new RET would be required to achieve a rule, sometime the design rules would be required to relax their numbers, and sometime new design rules would be required to avoid less process capability. In this paper, we propose the parallel development procedure for OPC, RET and design rules through the actual development of 45nm node logic device, focused on metal layer which has many pattern variations, and show how to build the competitive design rules by applying the latest OPC and RET technologies.

Paper Details

Date Published: 17 March 2008
PDF: 7 pages
Proc. SPIE 6925, Design for Manufacturability through Design-Process Integration II, 692512 (17 March 2008); doi: 10.1117/12.772382
Show Author Affiliations
Kenji Konomi, Toshiba Corp. (Japan)
Shigeki Nojima, Toshiba Corp. (Japan)
Shimon Maeda, Toshiba Corp. (Japan)
Takeshi Fujimaki, Toshiba Corp. (Japan)
Hirofumi Igarashi, Toshiba Corp. (Japan)
Ryuji Ogawa, Toshiba Corp. (Japan)
Shoji Mimotogi, Toshiba Corp. (Japan)


Published in SPIE Proceedings Vol. 6925:
Design for Manufacturability through Design-Process Integration II
Vivek K. Singh; Michael L. Rieger, Editor(s)

© SPIE. Terms of Use
Back to Top