Share Email Print

Proceedings Paper

Ellipsometric inspection of the inner surface of pellicle-covered masks
Author(s): Sangyouk Lee; Chulgi Song; Jusang Rhim; Hyoungjoo Lee; Jaisun Kyoung; Soobok Chin; Taehyuk Ahn; Ilsin An
Format Member Price Non-Member Price
PDF $17.00 $21.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Crystal growth and haze formation on photomasks become serious problems in UV lithography. As the wavelength becomes shorter, photons carry more energy, so the chances of having a photochemical reaction become much higher. Pellicle, adhesive, residue from cleaning or resist strip process, and any contaminant in air can react with UV to form unwanted crystals and a haze layer on reticles. These will reduce the light transmission during exposure process. Thus, frequent mask inspection and periodic mask cleaning are needed to overcome these problems. However, these will in turn increase manufacturing cost and reduce mask life. Thus, a proper mask inspection tool is required to provide early warning of haze formation. In this work, we devised a new ellipsometric technique to investigate the inner surface of mask without removing pellicle. Ellipsometry is known to have mono-layer sensitivity and it can be used to measure any film or partial film formed on non-patterned spot in early stage of growth. However, when a pellicle covers the surface of mask, the ellipsometric data reflected from surface are extremely distorted due to the non-normal transmission through the pellicle. Thus, data analysis becomes extremely difficult without knowing the optical properties of pellicles. In order to solve this problem we developed compensation technique in which two blank pellicles are situated in the optical path in a way to compensate the polarization changes caused by the pellicle on mask. With this method, the conventional ellipsometry spectra of {Δ, Ψ} are deduced.

Paper Details

Date Published: 24 March 2008
PDF: 10 pages
Proc. SPIE 6922, Metrology, Inspection, and Process Control for Microlithography XXII, 692227 (24 March 2008); doi: 10.1117/12.772151
Show Author Affiliations
Sangyouk Lee, Hanyang Univ. (South Korea)
Chulgi Song, Hanyang Univ. (South Korea)
Samsung Electronics Co. (South Korea)
Jusang Rhim, Hanyang Univ. (South Korea)
Hyoungjoo Lee, Hanyang Univ. (South Korea)
Jaisun Kyoung, Hanyang Univ. (South Korea)
Soobok Chin, Samsung Electronics Co. (South Korea)
Taehyuk Ahn, Samsung Electronics Co. (South Korea)
Ilsin An, Hanyang Univ. (South Korea)

Published in SPIE Proceedings Vol. 6922:
Metrology, Inspection, and Process Control for Microlithography XXII
John A. Allgair; Christopher J. Raymond, Editor(s)

© SPIE. Terms of Use
Back to Top