Share Email Print
cover

Proceedings Paper

A system to optimize mix-and-match overlay in lithography
Author(s): Shinji Wakamoto; Yuuki Ishii; Koji Yasukawa; Shinroku Maejima; Atsuhiko Kato; John C. Robinson; Dong-Sub Choi
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Critical processing factors in the lithography process include overlaying the pattern properly to previous layers and properly exposing the pattern to achieve the desired line width. Proper overlay can only be attained in the lithography process while the desired line width accuracy is achieved by both lithography and etch processes. Since CD is substantially influenced by etch processing, therefore, it is possible to say that overlay is one of the most important processing elements in the lithography process. To achieve the desired overlay accuracy, it is desirable to expose critical layers with the same exposure tool that exposed the previous or target layer. This need to dedicate a particular exposure tool, however, complicates the lot dispatching schedule and, even worse, decreases exposure tool utilization. In order to allow any exposure tool available to print the arriving lot, M&M (Mix and Match) overlay control becomes necessary. By reducing overlay errors in M&M control, lot dispatching scheduling will become more flexible and exposure tool utilization will improve. Since each exposure tool has a unique registration signature, high order errors appear when overlaying multiple layers exposed with different tools. Even with the same exposure tool, if a different illumination is used, a similar error will be seen. A correction scheme to make the signature differences has to be implemented, however manually characterizing each tool's signature per illumination condition is extremely tedious, and is subject human errors. The challenge is to design a system to perform the corrections automatically. In the previous paper(1), we have outlined concepts of the system scheme. The system has subsequently been developed and tested using exposure tools. In this paper test results are shown using automated distortion correction. By analyzing the results, suggestions for further improvements and further developments are shown.

Paper Details

Date Published: 26 March 2008
PDF: 11 pages
Proc. SPIE 6922, Metrology, Inspection, and Process Control for Microlithography XXII, 69222V (26 March 2008); doi: 10.1117/12.771778
Show Author Affiliations
Shinji Wakamoto, Nikon Corp. (Japan)
Yuuki Ishii, Nikon Corp. (Japan)
Koji Yasukawa, Nikon Corp. (Japan)
Shinroku Maejima, Renesas Technology Corp. (Japan)
Atsuhiko Kato, KLA-Tencor Japan, Ltd. (Japan)
John C. Robinson, KLA-Tencor Corp. (United States)
Dong-Sub Choi, KLA-Tencor Korea Co., Ltd. (South Korea)


Published in SPIE Proceedings Vol. 6922:
Metrology, Inspection, and Process Control for Microlithography XXII
John A. Allgair; Christopher J. Raymond, Editor(s)

© SPIE. Terms of Use
Back to Top