Share Email Print

Proceedings Paper

5 W frequency stabilized 976 nm tapered diode lasers
Author(s): Patrick Friedmann; Jürgen Gilly; Stefan Moritz; Ralf Ostendorf; Márc T. Kelemen
Format Member Price Non-Member Price
PDF $17.00 $21.00

Paper Abstract

More and more applications, like tunable frequency doubling of diode lasers for blue-green outputs, non linear spectroscopy, or pump laser sources for fiber lasers necessitate diffraction-limited tunable narrow linewidths and high output powers in the multiwatt regime. For these applications, tapered lasers based on a tapered amplifier with gain-guided design can be used in an external cavity set up to guarantee both - frequency stabilization and tunability. We have realized frequency stabilized high-power ridge-waveguide tapered diode lasers with more than 4W of cw output power. These low modal gain, single quantum well InGaAs/AlGaAs devices emitting between 920nm and 1064nm were grown by molecular beam epitaxy. Tapered single emitters consist of an index-guided ridge section and a gain-guided taper section with an overall length of 3.5mm. The taper angle was 6°. With a high-reflectivity coating on the rear facet and an antireflection coating on the front facet more than 10W of output power have been demonstrated. To optimize the beam quality at higher output power the two different sections have been operated by different operation currents. For this purpose the tapered diodes have been mounted p-side down on structured submounts. For wavelength tunability and frequency stabilization the tapered diodes, provided with AR coatings on both facets, have been used in external cavity setup in Littrow configuration. The influence of the different operation currents on the electrooptical and beam characteristics has been carefully investigated in detail. Within this operation mode a nearly diffraction limited behavior up to 5W has been established.

Paper Details

Date Published: 25 February 2008
PDF: 9 pages
Proc. SPIE 6876, High-Power Diode Laser Technology and Applications VI, 68761J (25 February 2008); doi: 10.1117/12.760932
Show Author Affiliations
Patrick Friedmann, m2k-laser GmbH (Germany)
Jürgen Gilly, m2k-laser GmbH (Germany)
Stefan Moritz, m2k-laser GmbH (Germany)
Ralf Ostendorf, Fraunhofer Institute for Applied Solid State Physics (Germany)
Márc T. Kelemen, m2k-laser GmbH (Germany)

Published in SPIE Proceedings Vol. 6876:
High-Power Diode Laser Technology and Applications VI
Mark S. Zediker, Editor(s)

© SPIE. Terms of Use
Back to Top