Share Email Print
cover

Proceedings Paper

Design of painless microneedle for blood extraction system
Author(s): Kazuyoshi Tsuchiya; Keisuke Isobata; Miho Sato; Yasutomo Uetsuji; Eiji Nakamachi; Kagemasa Kajiwara; Minoru Kimura
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

The microneedle size mimicking a female mosquito's labium which almost collects blood painless is effective to mitigate the injection pain for patients. The author has produced the microneedle production technique which can produce arbitrary size. The microneedle production technique is to deposit the microneedle material on a rotating wire substrate by a sputtering deposition method and etch the wire substrate by a chemical solution after a heat treatment. In the result, a titanium microneedle was produced (outer and inner diameter : 50 μm and 25μm) in the size mimicking that of female mosquito's labium. The inner diameter for the needle is decreased when outer diameter is decreased, hence, the rigidity of the needle is decreased and the pressure drop by pipe friction is increased. Therefore, microneedles to be able to mitigate the pain for the patient and decrease the pressure drop by pipe friction should be designed. In this study, the outer and inner diameters of 50 μm and 25 μm are defined as the basic dimension of the microneedle. Those rigidity and pressure drop by pipe friction in "n" polygonal shape circumscribed and inscribed for basic dimension in the microneedle are calculated. The best shape with "n" polygonal shape to satisfy conditions that needle has rigidity enough to inject the skin without buckling and to decrease the pressure drop by pipe friction to be able to extract blood was searched. The pressure loss became small more than the negative pressure generated with SMA micro pump in n=6. Therefore, the microneedle with sexanglular shape(n=6) made by titanium(E=110.6GPa) can be injected into the skin without buckling and decreased the pressure drop by pipe friction.

Paper Details

Date Published: 27 December 2007
PDF: 11 pages
Proc. SPIE 6799, BioMEMS and Nanotechnology III, 67990Q (27 December 2007); doi: 10.1117/12.759058
Show Author Affiliations
Kazuyoshi Tsuchiya, Tokai Univ. (Japan)
Keisuke Isobata, Tokai Univ. (Japan)
Miho Sato, Tokai Univ. (Japan)
Yasutomo Uetsuji, Osaka Institute of Technology (Japan)
Eiji Nakamachi, Osaka Institute of Technology (Japan)
Kagemasa Kajiwara, Tokai Univ. (Japan)
Minoru Kimura, Tokai Univ. (Japan)


Published in SPIE Proceedings Vol. 6799:
BioMEMS and Nanotechnology III
Dan V. Nicolau; Derek Abbott; Kourosh Kalantar-Zadeh; Tiziana Di Matteo; Sergey M. Bezrukov, Editor(s)

© SPIE. Terms of Use
Back to Top