Share Email Print
cover

Proceedings Paper

Transmission performance of optical millimeter wave generated by one modulator
Author(s): Cheng Huang; Lin Chen; Shuangchun Wen
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

In this paper, a scheme of optical millimeter (mm)-wave generation by using only one phase modulator has been investigated experimentally. To generate a mixing signal, the baseband signal is mixed with the radio frequency (RF) signal using an electric mixer. And the double-sideband (DSB) signal generated from phase modulator driven by the mixing signal is transmitted to base station via a single mode fiber. The central carrier and the first-order sideband are separated by an optical interleaver at base station. The two peak modes of the first-order sideband will beat to generate an mm-wave with a double repetitive frequency of the RF signal when they are detected by an optical receiver. The transmission performance of the optical mm-wave is analyzed. According to our research, the different delay of two first sidebands due to the fiber dispersion will lead to power loss of the mm-wave. And the duty cycle of the code is reduced. It limits the largest transmission distance of the mm-wave. In the experiment, the 20GHz RF signal generates 40GHz mm-wave and 2.5Gbps NRZ is carried by the mm-wave. For downlink connection, the power penalty is 0.2 dB after transmission over 20-km.

Paper Details

Date Published: 4 January 2008
PDF: 7 pages
Proc. SPIE 6837, Information Optics and Photonics Technologies II, 68370K (4 January 2008); doi: 10.1117/12.755687
Show Author Affiliations
Cheng Huang, Hunan Univ. (China)
Lin Chen, Hunan Univ. (China)
Shuangchun Wen, Hunan Univ. (China)


Published in SPIE Proceedings Vol. 6837:
Information Optics and Photonics Technologies II
Guoguang Mu; Feijun Song; Francis T. S. Yu; Suganda Jutamulia, Editor(s)

© SPIE. Terms of Use
Back to Top