Share Email Print
cover

Proceedings Paper

Practical use of hard mask process to fabricate fine photomasks for 45nm node and beyond
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

New process with hard-mask (HM) blanks was evaluated as one of candidates for photomasks beyond 45nm-node. Through the fabrication of gate-layer photomasks, aptitude of the HM process for practical use was confirmed from the view of controllability on CDs and defects. Although conventional process for attenuated PSM was shown to have critical CD error which belongs to the "patterns" in bright-field masks, experimental data proved effectiveness of the HM process to control CDs after process optimization. With the HM blanks, remarkable reduction of CD error more than 80% of conventional process was confirmed. In this report, peculiar opaque defects are also shown to be a critical issue on the HM process. From results of design of experiment (DOE), combining the proper means to prepare the HM blanks with the optimized HM etching condition, these defects were proved to be controlled within the tolerance for production. Through the investigations, validity of the HM process on practical use for mask fabrication of 45nm-node and beyond is considered as conclusions.

Paper Details

Date Published: 1 November 2007
PDF: 10 pages
Proc. SPIE 6730, Photomask Technology 2007, 673045 (1 November 2007); doi: 10.1117/12.751244
Show Author Affiliations
Yasuyuki Kushida, Fujitsu Ltd. (Japan)
Hitoshi Handa, Fujitsu Ltd. (Japan)
Hiroshi Maruyama, Fujitsu Ltd. (Japan)
Yuuki Abe, Dai Nippon Printing Co., Ltd. (Japan)
Yukihiro Fujimura, Dai Nippon Printing Co., Ltd. (Japan)
Toshifumi Yokoyama, Dai Nippon Printing Co., Ltd. (Japan)


Published in SPIE Proceedings Vol. 6730:
Photomask Technology 2007
Robert J. Naber; Hiroichi Kawahira, Editor(s)

© SPIE. Terms of Use
Back to Top