Share Email Print
cover

Proceedings Paper

Mask characterization for double patterning lithography
Author(s): Karsten Bubke; Eric Cotte; Jan Hendrik Peters; Robert de Kruif; Mircea Dusa; Joerg Fochler; Brid Connolly
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Double patterning (DPT) lithography is seen industry-wide as an intermediate solution for the 32nm node if high index immersion as well as extreme ultraviolet lithography are not ready for a timely release for production. Apart from the obvious drawbacks of additional exposure, processing steps and the resulting reduced throughput, DPT possesses a number of additional technical challenges. This relates to, e.g., exposure tool capability, the actual applied process in the wafer fab but also to mask performance and metrology. In this paper we will address the mask performance. To characterize the mask performance in an actual DPT process, conventional parameters need to be re-evaluated. Furthermore new parameters might be more suitable to describe mask capability. This refers to, e.g., reticle to reticle overlay but also to CD differences between masks of a DPT reticle set. A DPT target of reticle to reticle induced overlay of 6nm, 3σ at mask level was proposed recently for the 32nm node. The results show that this target can be met. Besides that, local CD variations and local displacement become critical. Finally, the actual mask metrology for determination of these parameters might not be trivial and needs to be set up and characterized properly. In this paper we report on the performance of two-reticle sets based on a design developed to study the impact of mask global and local placement errors on a DPT dual line process. In a first step we focus on reticle to reticle overlay. The overlay between two masks evaluated for different wafer overlay targets is compared with measurements on actual resolution structures. In a second step, mask to mask CD variations are addressed. Off-target CD differences as well as variations of CD signatures on both reticles of a set are investigated. Finally, local CD variations and local displacements are examined. To this aim, local variations of adjacent structures on the reticle are characterized. The contribution of local effects to the overall CD and registration budget is estimated.

Paper Details

Date Published: 30 October 2007
PDF: 10 pages
Proc. SPIE 6730, Photomask Technology 2007, 67301H (30 October 2007); doi: 10.1117/12.747006
Show Author Affiliations
Karsten Bubke, Advanced Mask Technology Ctr. GmbH & Co. KG (Germany)
Eric Cotte, Advanced Mask Technology Ctr. GmbH & Co. KG (Germany)
Jan Hendrik Peters, Advanced Mask Technology Ctr. GmbH & Co. KG (Germany)
Robert de Kruif, ASML Netherlands B.V. (Netherlands)
Mircea Dusa, ASML US, Inc. (United States)
Joerg Fochler, Toppan Photomasks, Inc. (Germany)
Brid Connolly, Toppan Photomasks, Inc. (Germany)


Published in SPIE Proceedings Vol. 6730:
Photomask Technology 2007
Robert J. Naber; Hiroichi Kawahira, Editor(s)

© SPIE. Terms of Use
Back to Top