Share Email Print

Proceedings Paper

Calibrating a ground-based backscatter lidar for continuous measurements of PM2.5
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

One of the main issues of atmospheric research and air quality control is the reduction of harmful particulate matter (PM) in the atmosphere. Small particles can enter the human airways and cause serious health problems such as COPD (Chronic Obstructive Pulmonary Disease), asthma or even lung cancer. Recently, interest has shifted from PM10 to finer fractions of particulate matter, e.g. PM2.5, because the health impact of finer particles is considered to be more severe. Up to now measurements of particulate matter were carried out mainly at ground level. However important atmospheric processes, i.e. particle formation, transport and vertical mixing processes, take place predominantly at higher altitudes in the planetary boundary layer. Lidar in principle provides the ability to observe these processes where they occur. The new method outlined in this paper demonstrates the use of a small sized and quite inexpensive lidar in stand-alone operation to investigate transport processes of particulate matter, and PM2.5 in particular. Continuous measurements of PM2.5 as a reference are gained with a conventional in-situ monitor, installed on a tower at an altitude of 325 m in the North of Berlin (Frohnauer Turm). These PM2.5 measurements will be compared with backscatter Lidar data (1064 nm) taken from approx. 60 m over ground up to an altitude of 15 km with a spatial resolution of 15 m. The vertical backscatter profiles at 325 m will be correlated to the concentrations obtained by the PM2,5 monitor on the tower. Both measurements have a time resolution of 180 s to observe also processes that take place at short time scales. The objective is to gain correlation functions for estimating PM2.5 concentrations from backscatter Lidar data. Such a calibrated Lidar system is a valuable instrument for environmental agencies and atmospheric research groups to observe and investigate causes of high level PM concentrations. First results show a reasonably good linear correlation depending on the level of the relative humidity.

Paper Details

Date Published: 3 October 2007
PDF: 11 pages
Proc. SPIE 6750, Lidar Technologies, Techniques, and Measurements for Atmospheric Remote Sensing III, 67500K (3 October 2007); doi: 10.1117/12.737732
Show Author Affiliations
Markus Pesch, Technical Univ. Berlin (Germany)
Daniel Oderbolz, Technical Univ. Berlin (Germany)

Published in SPIE Proceedings Vol. 6750:
Lidar Technologies, Techniques, and Measurements for Atmospheric Remote Sensing III
Upendra N. Singh; Gelsomina Pappalardo, Editor(s)

© SPIE. Terms of Use
Back to Top