Share Email Print

Proceedings Paper

Analysis and optimization of thin film photovoltaic materials and device fabrication by real time spectroscopic ellipsometry
Author(s): Jian Li; Jason A. Stoke; Nikolas J. Podraza; Deepak Sainju; Anuja Parikh; Xinmin Cao; Himal Khatri; Nicolas Barreau; Sylvain Marsillac; Xunming Deng; Robert W. Collins
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Methods of spectroscopic ellipsometry (SE) have been applied to investigate the growth and properties of the material components used in the three major thin film photovoltaics technologies: (1) hydrogenated silicon (Si:H); (2) cadmium telluride (CdTe); and (3) copper indium-gallium diselenide (CuIn1-xGaxSe2 or CIGS). In Si:H technology, real time SE (RTSE) has been applied to establish deposition phase diagrams that describe very high frequency (vhf) plasmaenhanced chemical vapor deposition (PECVD) processes for hydrogenated silicon (Si:H) and silicon-germanium alloy (Si1-xGex:H) thin films. This study has reaffirmed that the highest efficiencies for a-Si:H and a-Si1-xGex:H component solar cells of multijunction devices are obtained when the i-layers are prepared under maximal H2 dilution conditions. In CdTe technology, the magnetron sputter deposition of polycrystalline CdTe, CdS, and CdTe1-xSx thin films as well as the formation of CdS/CdTe and CdTe/CdS heterojunctions has been studied. The nucleation and growth behaviors of CdTe and CdS show strong variations with deposition temperature, and this influences the ultimate grain size. The dielectric functions ε of the CdTe1-xSx alloys have been deduced in order to set up a database for real time investigation of inter-diffusion at the CdS/CdTe and CdTe/CdS interfaces. In CIGS technology, strong variations in ε of the Mo back contact during sputter deposition have been observed, and these results have been understood applying a Drude relaxation time that varies with the Mo film thickness. Ex-situ SE measurements of a novel In2S3 window layer have shown critical point structures at 2.77±0.08 eV, 4.92±0.005 eV, and 5.64±0.005 eV, as well as an absorption tail with an onset near 1.9 eV. Simulations of solar cell performance comparing In2S3 and the conventional CdS have revealed similar quantum efficiencies, suggesting the possibility of a Cd-free window layer in CIGS technology.

Paper Details

Date Published: 3 October 2007
PDF: 14 pages
Proc. SPIE 6651, Photovoltaic Cell and Module Technologies, 665107 (3 October 2007); doi: 10.1117/12.736362
Show Author Affiliations
Jian Li, Univ. of Toledo (United States)
Jason A. Stoke, Univ. of Toledo (United States)
Nikolas J. Podraza, Univ. of Toledo (United States)
The Pennsylvania State Univ. (United States)
Deepak Sainju, Univ. of Toledo (United States)
Anuja Parikh, Univ. of Toledo (United States)
Xinmin Cao, Univ. of Toledo (United States)
Himal Khatri, Univ. of Toledo (United States)
Nicolas Barreau, LAMP, Univ. of Nantes (France)
Sylvain Marsillac, Univ. of Toledo (United States)
Xunming Deng, Univ. of Toledo (United States)
Robert W. Collins, Univ. of Toledo (United States)

Published in SPIE Proceedings Vol. 6651:
Photovoltaic Cell and Module Technologies
Bolko von Roedern; Alan E. Delahoy, Editor(s)

© SPIE. Terms of Use
Back to Top