Share Email Print
cover

Proceedings Paper

Combining coordinate measurement and nanometrology for large-range nanoscale metrology
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

The Nanometer-Coordinate-Measuring-Machine (NCMM) is developed for comparatively fast large area scans with high resolution for measuring critical dimensions. The system combines a metrological atomic force microscope (AFM) with a precise positioning system. The sample is moved under the probe system via the positioning system achieving a scan range of 25 x 25 x 5 mm3 with a resolution of 1.24 nm. An AFM has a resolution beyond the wavelength of light and is a material-variable sensor. The cantilever of the used AFM can only be moved up and down via a monolytic piezoblock avoiding dynamic crosstalk. Combined with the up and down movement of the positioning system a multistage measurement is achieved. Through its overall coordinate system, the NCMM can scan very fast, since just regions of interest have to be scanned and no stitching procedures are needed afterwards. The measurements are traceable to the meter-definition since all movements of the drives and the AFMs cantilever are measured via laser-interferometers and the Abbé-principle is kept in every dimension. To meet thermal demands, materials with low thermal expansion coefficients are used and the metrological frame is kept small. A focus is on automating the measurements by the use of a-priori-knowledge of the sample, optical navigation and image processing.

Paper Details

Date Published: 10 September 2007
PDF: 10 pages
Proc. SPIE 6648, Instrumentation, Metrology, and Standards for Nanomanufacturing, 66480I (10 September 2007); doi: 10.1117/12.733527
Show Author Affiliations
Martin Gruhlke, Helmut-Schmidt Univ. (Germany)
Hendrik Rothe, Helmut-Schmidt Univ. (Germany)


Published in SPIE Proceedings Vol. 6648:
Instrumentation, Metrology, and Standards for Nanomanufacturing
Michael T. Postek; John A. Allgair, Editor(s)

© SPIE. Terms of Use
Back to Top