Share Email Print
cover

Proceedings Paper

The relationship between surface incline and con-focal chromatic aberration sensor response
Author(s): J. W. McBride; P. J. Boltryk; Z. Zhao
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

The limiting performance characteristics of con-focal chromatic aberration displacement sensors are angular tolerance and the gauge range over which an output is provided. The sensor selected in this study is used to measure groove profiles in early recorded surfaces. The sensor is used in a 3 dimensional cylinder scanning system for the measurement of wax cylinder recordings, where the 3 dimensional data is used to create a map of the measured surface for archival purposes. The generation of the map allows the sound recorded on the surface to be decoded without physical contact to the surface. It has been shown in a previous study that data resolution of 10-20nm are required for this application, and that the relationship between the data output and the surface incline is critical to system performance. To understand the relationship with surface slope the sensor is used here in a study of the measurement of calibration ball surfaces, and follows a previous study on machined grooves with known angular properties. In this study a range of calibration spherical surfaces are used to investigate the relationship between the sensor output and measurement parameters, including the distance between the sensor optical head and the surface. A linear least squares method is used to evaluate the 3D radius of the measured surfaces, and this is used as a parameter to evaluate the systematic errors. The results show that there is a low level of systematic form error typically below 1&mgr;m, but that this error has a significant impact on the evaluation of the radius. Recommendations are made on methods for optimisation of sensor performance.

Paper Details

Date Published: 16 July 2007
PDF: 10 pages
Proc. SPIE 6618, O3A: Optics for Arts, Architecture, and Archaeology, 66181F (16 July 2007); doi: 10.1117/12.726189
Show Author Affiliations
J. W. McBride, Univ. of Southampton (United Kingdom)
P. J. Boltryk, Univ. of Southampton (United Kingdom)
Z. Zhao, Univ. of Southampton (United Kingdom)


Published in SPIE Proceedings Vol. 6618:
O3A: Optics for Arts, Architecture, and Archaeology
Costas Fotakis; Luca Pezzati; Renzo Salimbeni, Editor(s)

© SPIE. Terms of Use
Back to Top