Share Email Print

Proceedings Paper

Fiber optic strain measurement for machine monitoring
Format Member Price Non-Member Price
PDF $17.00 $21.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Monitoring machines during operation is an important issue in measurement engineering. The usual approach to monitoring specific machine components is using strain gauges. Strain gauges, however, may sometimes not be used if conditions are harsh or installation space is limited. Fiber optic sensors seem to be an alternative here, but dynamic health monitoring has been dificult so far. The focus of this field study is to measure vibration characteristics of machine parts during operation using fiber optic sensors with the objective of early damage detection. If that was possible, downtime and maintenance costs could be minimized. Therefore a field test for dynamic fiber optic strain measurement on a roller bearing was carried out. The test setup consisted of the bearing built into a gear test stand and equipped with an array of fiber Bragg grating sensors. Fifteen fiber sensors were interrogated with a sample rate of 1 kHz and the vibration pattern was extracted. The radial load distribution was measured with high spatial resolution and a high degree of compliance with simulation data was found. The findings suggest that fiber optic health monitoring for machine components is feasible and reasonable. Especially with the help of distributed sensing on various components extensive health monitoring on complex technical systems is possible.

Paper Details

Date Published: 18 June 2007
PDF: 9 pages
Proc. SPIE 6616, Optical Measurement Systems for Industrial Inspection V, 66163A (18 June 2007); doi: 10.1117/12.726026
Show Author Affiliations
L. Hoffmann, Technische Univ. Muenchen (Germany)
M. S. Mueller, Technische Univ. Muenchen (Germany)
A. W. Koch, Technische Univ. Muenchen (Germany)

Published in SPIE Proceedings Vol. 6616:
Optical Measurement Systems for Industrial Inspection V
Wolfgang Osten; Christophe Gorecki; Erik L. Novak, Editor(s)

© SPIE. Terms of Use
Back to Top