Share Email Print
cover

Proceedings Paper

Fiber-coupled NbN superconducting single-photon detectors for quantum correlation measurements
Author(s): W. Slysz; M. Wegrzecki; J. Bar; P. Grabiec; M. Gorska; E. Rieger; P. Dorenbos; V. Zwiller; I. Milostnaya; O. Minaeva; A. Antipov; O. Okunev; A. Korneev; K. Smirnov; B. Voronov; N. Kaurova; G. N. Gol'tsman; J. Kitaygorsky; D. Pan; A. Pearlman; A. Cross; I. Komissarov; Roman Sobolewski
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

We have fabricated fiber-coupled superconducting single-photon detectors (SSPDs), designed for quantum-correlationtype experiments. The SSPDs are nanostructured (~100-nm wide and 4-nm thick) NbN superconducting meandering stripes, operated in the 2 to 4.2 K temperature range, and known for ultrafast and efficient detection of visible to nearinfrared photons with almost negligible dark counts. Our latest devices are pigtailed structures with coupling between the SSPD structure and a single-mode optical fiber achieved using a micromechanical photoresist ring placed directly over the meander. The above arrangement withstands repetitive thermal cycling between liquid helium and room temperature, and we can reach the coupling efficiency of up to ~33%. The system quantum efficiency, measured as the ratio of the photons counted by SSPD to the total number of photons coupled into the fiber, in our early devices was found to be around 0.3 % and 1% for 1.55 &mgr;m and 0.9 &mgr;m photon wavelengths, respectively. The photon counting rate exceeded 250 MHz. The receiver with two SSPDs, each individually biased, was placed inside a transport, 60-liter liquid helium Dewar, assuring uninterrupted operation for over 2 months. Since the receiver's optical and electrical connections are at room temperature, the set-up is suitable for any applications, where single-photon counting capability and fast count rates are desired. In our case, it was implemented for photon correlation experiments. The receiver response time, measured as a second-order photon cross-correlation function, was found to be below 400 ps, with timing jitter of less than 40 ps.

Paper Details

Date Published: 15 May 2007
PDF: 11 pages
Proc. SPIE 6583, Photon Counting Applications, Quantum Optics, and Quantum Cryptography, 65830J (15 May 2007); doi: 10.1117/12.723729
Show Author Affiliations
W. Slysz, Institute of Electron Technology (Poland)
M. Wegrzecki, Institute of Electron Technology (Poland)
J. Bar, Institute of Electron Technology (Poland)
P. Grabiec, Institute of Electron Technology (Poland)
M. Gorska, Institute of Electron Technology (Poland)
E. Rieger, Delft Univ.of Technology (Netherlands)
P. Dorenbos, Delft Univ. of Technology (Netherlands)
V. Zwiller, Delft Univ.of Technology (Netherlands)
I. Milostnaya, Moscow State Pedagogical Univ. (Russia)
O. Minaeva, Moscow State Pedagogical Univ. (Russia)
A. Antipov, Moscow State Pedagogical Univ. (Russia)
O. Okunev, Moscow State Pedagogical Univ. (Russia)
A. Korneev, Moscow State Pedagogical Univ. (Russia)
K. Smirnov, Moscow State Pedagogical Univ. (Russia)
B. Voronov, Moscow State Pedagogical Univ. (Russia)
N. Kaurova, Moscow State Pedagogical Univ. (Russia)
G. N. Gol'tsman, Moscow State Pedagogical Univ. (Russia)
J. Kitaygorsky, Univ. of Rochester (United States)
D. Pan, Univ. of Rochester (United States)
A. Pearlman, Univ. of Rochester (United States)
A. Cross, Univ. of Rochester (United States)
I. Komissarov, Univ. of Rochester (United States)
Roman Sobolewski, Univ. of Rochester (United States)


Published in SPIE Proceedings Vol. 6583:
Photon Counting Applications, Quantum Optics, and Quantum Cryptography
Miloslav Dusek; Mark S. Hillery; Wolfgang P. Schleich; Ivan Prochazka; Alan L. Migdall; Alexandre Pauchard, Editor(s)

© SPIE. Terms of Use
Back to Top