Share Email Print
cover

Proceedings Paper

LiNbO3 optical modulator for MMW sensing and imaging
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

We present several novel technologies for sensing millimeter-wave (mmW) radiation for imaging and spectroscopy based on photonic devices. Along these lines, in our high-sensitivity millimeter-wave (mmW) imaging system, which is based on optical upconversion, the power of mmW radiation is transferred to the sidebands on an optical carrier via an electro-optic (EO) modulator fed by a broadband horn antenna. The detection is realized by measuring the transferred optical power of the sidebands. The sensitivity of this detection system is primarily controlled by the conversion efficiency of the EO modulator at the desired mmW frequency (e.g. 95GHz). Thus, modulators are required that exhibit an ultra-broad bandwidth and small drive voltage. In this paper, we present the design, fabrication, and characteristics of LiNbO3 traveling-wave modulator for the mmW detection system. In a traveling-wave modulator, the bandwidth is limited by the mismatch between electrical and optical propagation constants. We have developed several techniques to finely tune the propagation constant of the mmWs in the modulator and have thereby eliminated this mismatch. Further bandwidth limitations for the modulator arise from losses in the electrode conductor, the substrate and buffer layer dielectrics, and coupling between the traveling-wave mode and the substrate modes. Modulator structures are described to reduce those losses without increasing the device driving voltage. The bandwidth and conversion limits of these structures are also discussed. The mmW detection pixels using the fabricated modulators were assembled, characterized, and analyzed. A high-sensitivity W-band detection system with a low noise-equivalent temperature difference (NETD) has been demonstrated. In addition, we present ongoing work to improve coupling millimeter-wave energy to the modulator at the W-band using techniques viable for packaged devices.

Paper Details

Date Published: 1 May 2007
PDF: 9 pages
Proc. SPIE 6548, Passive Millimeter-Wave Imaging Technology X, 65480I (1 May 2007); doi: 10.1117/12.718794
Show Author Affiliations
C. J. Huang, Univ. of Delaware (United States)
C. A. Schuetz, Univ. of Delaware (United States)
R. Shireen, Univ. of Delaware (United States)
S. Shi, Univ. of Delaware (United States)
D. W. Prather, Univ. of Delaware (United States)


Published in SPIE Proceedings Vol. 6548:
Passive Millimeter-Wave Imaging Technology X
Roger Appleby; David A. Wikner, Editor(s)

© SPIE. Terms of Use
Back to Top